Windsor SCC20T, SCX20T, SCXC20T, SC20T KEY Switch, Propel Buttons Normally Forward

Page 15

CONTROLS - TRACTION

1.SOLUTION CONTROL KNOB Controls solution flow to scrub deck.

To increase flow, rotate knob clockwise.

To decrease flow, rotate knob counterclockwise.

If the brush motor is turned off or the direction control lever is in neutral, the flow is automatically interrupted until the motor is turned on again. This feature prevents unintentional draining of the solution tank and allows the operator to adjust the solution flow to the scrub deck without resetting each time the scrubbing operation is interrupted.

2.BRUSH SWITCH

Controls the scrub brush motor.

To turn scrub brush on, press the top of the switch. The brush will not rotate with the direction control lever in neutral.

To turn the scrub brush off, press the bottom of the switch.

3.BRUSH LIFT LEVER Raises and lowers the brush.

To lower the brush, lift the lever from the notch, move to the left, then lower.

To increase brush pressure, lock the lever into the lowered position.

To raise the brush, lift the lever from its lowered position and lock into highest notch.

4.VACUUM SWITCH Controls the vacuum motor.

To start vacuum motor, press the top of the switch.

To stop vacuum motor, press the bottom of the switch.

5.SQUEEGEE LIFT LEVER Raises and lowers the squeegee.

To lower the squeegee, lift and pull the lever to the left and then lower.

To raise the squeegee, lift the lever and push it to the right.

6.KEY SWITCH

Controls the power for machine functions. To turn machine on, rotate key clockwise.

To turn machine off, rotate key counterclockwise.

FOR SAFETY: Always remove the key when machine is unattended or during service to prevent unauthorized movement.

7.PROPEL BUTTONS (NORMALLY FORWARD)

Controls the machine direction, scrub brush and solution flow.

To propel machine forward, push the button on either of the control handles.

The scrub brush will not rotate and the solution will not flow to the scrub deck unless a propel button is pushed.

8.REVERSE PROPEL BUTTON Controls the machine direction in reverse.

To propel machine backward, push the button on the control panel and one of the buttons on either of the control handles.

3-8

SABER (SC) 86038350 01/29/07

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Walk Behind Scrubber Machine Data LOG/OVERVIEW Your DealerOverview Table of Contents Model HOW to USE this ManualRead ALL Instructions Before Using this Machine Important Safety InstructionsHazard Intensity Level Hazard Intensity LevelSafety Decal 86252530 PRV no Safety Label LocationDIMENSION/CAPACITY Technical SpecificationsMeasure Special NotesHOW the Machine Works Components Controls NON-TRACTION Circuit Breakers Brush SwitchControls NON Traction Hour Meter OptionalControls Traction Propel Buttons Normally Forward KEY SwitchEmergency SHUT-OFF Switch Optional Machine Operation To Begin Scrubbing To Stop ScrubbingDouble Scrub Solution Tank Emptying and Cleaning TanksBatteries MaintenanceMaintenance + red Blk Finished Floors Replacing or Installing Scrub BrushesScrub Brushes Uncoated FloorsMaintenance To Replace Squeegee Blades To Remove Squeegee AssemblyAdjusting Deluxe Squeegee Squeegee BladesTo Replace or Rotate Front Squeegee Blade To Adjust Squeegee PitchTo Adjust Amount of Rear Squeegee Deflection To Replace or Rotate Rear Squeegee BladeHRS Maintenance Service ScheduleProblem Cause Machine TroubleshootingProblem Cause Solution

SC20T, SC20, SCC20, SCXC20T, SCX20T specifications

Windsor SCC20, SC20, SCC20T, SCX20T, and SC20T represent a remarkable range of innovative cleaning equipment designed primarily for commercial and industrial use. These models, known for their rugged build and advanced technology, cater to various surface cleaning needs in settings like warehouses, retail spaces, and factories.

One of the standout features of the Windsor SCC20 series is its powerful cleaning capability. The machines are equipped with high-performance vacuum motors that ensure effective suction, allowing for the collection of dirt, debris, and moisture in one pass. This efficiency not only saves time but also enhances the overall cleaning experience. The SC20T and SCC20T variants take this efficiency further with their upgraded features, enabling them to handle even tougher grime and larger debris with ease.

In terms of technology, the Windsor models integrate user-friendly controls and ergonomic designs. The adjustable handle ensures comfort during prolonged use, while the intuitive control panel simplifies operation, allowing staff to operate the machines without extensive training. The SCC20T and SCX20T further boast advanced filtration systems, capturing airborne particulate matter, which is crucial for maintaining a healthier working environment.

Another critical characteristic is the durability of these machines. Built with robust materials and designed to withstand harsh conditions, the SCC20 series is particularly favored in high-traffic areas. Maintenance is also user-friendly, with easy-access ports for troubleshooting and quick repairs. This feature significantly reduces downtime during cleaning operations, making them reliable partners in maintaining cleanliness.

Windsor's commitment to environmental sustainability is evident in its cleaner formulations and energy-efficient motors. The SCC20 and related models operate with reduced noise levels, which is particularly beneficial in settings where noise pollution is a concern.

In summary, the Windsor SCC20, SC20, SCC20T, SCX20T, and SC20T are standout cleaning solutions characterized by their powerful performance, user-friendly design, and durability. With advanced technologies aimed at increasing efficiency and maintaining a healthier workspace, these models exemplify Windsor's dedication to delivering top-tier cleaning equipment that meets the diverse needs of various industries. Whether for daily maintenance or deep cleaning tasks, the SCC20 series provides a comprehensive approach to effective cleaning solutions.
Top Page Image Contents