Windsor SCXC20T, SCX20T, SC20T, SCC20T To Remove Squeegee Assembly, To Replace Squeegee Blades

Page 25

SQUEEGEE BLADES

The front squeegee blade allows solution to pass through channels in the blade into the squeegee assembly while maintaining vacuum to provide lift.

The rear blade wipes the floor to a near dry condition. It is important the rear blade be in good condition to properly do its job.

Check both the front and rear squeegee blades for damage and wear each day in the pre-run check. Change the front blade if it is torn or has an uneven edge. Change the rear blade if it is less than 1/2 the original thickness.

TO REMOVE SQUEEGEE ASSEMBLY

1.With the squeegee in the up position, turn the machine power off.

2.Loosen both squeegee knobs and pull squeegee assembly rearward from the lifting carrier.

3.Inspect or repair as necessary and reinstall.

TO REPLACE SQUEEGEE BLADES

1.With the squeegee in the up position, turn the machine power off.

FOR SAFETY: Before leaving or servicing machine; stop on level surface, turn off machine and remove key.

2.Remove the squeegee assembly from the machine. Remove all screws and remove blade retainer strap and remove squeegee blade.

3.Replace squeegee blades as required.

4.Install blade with ribbed surface facing out.

5.Install squeegee retainer strap.

6.Install all screws starting from center and working to ends.

MAINTENANCE

DELUXE SQUEEGEE BLADES

The front squeegee blade allows solution to pass through channels in the blade into the squeegee assembly while maintaining vacuum to provide lift. The front blade has four wear surfaces and can be rotated for extended life. The front blade should not require regular replacement under normal use.

The rear blade wipes the floor to a near dry condition. It is important the rear blade be in good condition to properly do its job. Each rear squeegee blade has four wear surfaces for extended service.

Check both the front and rear squeegee blades for damage, wear, and adjustment each day in the pre- run check. Change the front blade if it is torn or has an uneven edge. Change the rear blade if it is less than 1/2 the original thickness.

ADJUSTING DELUXE SQUEEGEE

Adjusting the squeegee is a two-part process. First, the squeegee assembly must have correct pitch in order for the squeegee blade to have the same deflection at each tip as well as the center. The knob on the squeegee linkage controls the pitch adjustment. The second adjustment is the deflection.

3/8”

PROPER DEFLECTION OF SQUEEGEE BLADE

SQUEEGEE DEFLECTION

CORRECT

NOT ENOUGH

TOO MUCH

SQUEEGEE SIDE VIEW OF BLADES

SABER (SC) 86038350 01/29/07

4-6

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Walk Behind Scrubber Your Dealer Machine Data LOG/OVERVIEWOverview Table of Contents Model HOW to USE this ManualRead ALL Instructions Before Using this Machine Important Safety InstructionsHazard Intensity Level Hazard Intensity LevelSafety Decal 86252530 PRV no Safety Label LocationDIMENSION/CAPACITY Technical SpecificationsMeasure Special NotesHOW the Machine Works Components Controls NON-TRACTION Controls NON Traction Brush SwitchHour Meter Optional Circuit BreakersControls Traction Propel Buttons Normally Forward KEY SwitchEmergency SHUT-OFF Switch Optional Machine Operation To Stop Scrubbing To Begin ScrubbingDouble Scrub Solution Tank Emptying and Cleaning TanksBatteries MaintenanceMaintenance + red Blk Scrub Brushes Replacing or Installing Scrub BrushesUncoated Floors Finished FloorsMaintenance Adjusting Deluxe Squeegee To Remove Squeegee AssemblySqueegee Blades To Replace Squeegee BladesTo Adjust Amount of Rear Squeegee Deflection To Adjust Squeegee PitchTo Replace or Rotate Rear Squeegee Blade To Replace or Rotate Front Squeegee BladeHRS Maintenance Service ScheduleProblem Cause Machine TroubleshootingProblem Cause Solution

SC20T, SC20, SCC20, SCXC20T, SCX20T specifications

Windsor SCC20, SC20, SCC20T, SCX20T, and SC20T represent a remarkable range of innovative cleaning equipment designed primarily for commercial and industrial use. These models, known for their rugged build and advanced technology, cater to various surface cleaning needs in settings like warehouses, retail spaces, and factories.

One of the standout features of the Windsor SCC20 series is its powerful cleaning capability. The machines are equipped with high-performance vacuum motors that ensure effective suction, allowing for the collection of dirt, debris, and moisture in one pass. This efficiency not only saves time but also enhances the overall cleaning experience. The SC20T and SCC20T variants take this efficiency further with their upgraded features, enabling them to handle even tougher grime and larger debris with ease.

In terms of technology, the Windsor models integrate user-friendly controls and ergonomic designs. The adjustable handle ensures comfort during prolonged use, while the intuitive control panel simplifies operation, allowing staff to operate the machines without extensive training. The SCC20T and SCX20T further boast advanced filtration systems, capturing airborne particulate matter, which is crucial for maintaining a healthier working environment.

Another critical characteristic is the durability of these machines. Built with robust materials and designed to withstand harsh conditions, the SCC20 series is particularly favored in high-traffic areas. Maintenance is also user-friendly, with easy-access ports for troubleshooting and quick repairs. This feature significantly reduces downtime during cleaning operations, making them reliable partners in maintaining cleanliness.

Windsor's commitment to environmental sustainability is evident in its cleaner formulations and energy-efficient motors. The SCC20 and related models operate with reduced noise levels, which is particularly beneficial in settings where noise pollution is a concern.

In summary, the Windsor SCC20, SC20, SCC20T, SCX20T, and SC20T are standout cleaning solutions characterized by their powerful performance, user-friendly design, and durability. With advanced technologies aimed at increasing efficiency and maintaining a healthier workspace, these models exemplify Windsor's dedication to delivering top-tier cleaning equipment that meets the diverse needs of various industries. Whether for daily maintenance or deep cleaning tasks, the SCC20 series provides a comprehensive approach to effective cleaning solutions.
Top Page Image Contents