Windsor SCX20T, SCXC20T, SC20T, SCC20T operating instructions Machine Operation

Page 17

PRE-RUN MACHINE INSPECTION

Do a pre-run inspection to find possible problems that could cause poor performance or lost time from breakdown. Follow the same procedure each time to avoid missing steps.

NOTE: See maintenance section for pre-run machine inspection checklist items.

STARTING MACHINE

NOTE: Perform pre-run machine check before operating machine.

FOR SAFETY: Before starting machine, make sure that all safety devices are in place and operating properly.

1.Turn the machine power on.

2.Press the directional control button(s) to move in the desired direction, if your machine is traction model.

EMERGENCY STOP PROCEDURES

1.Release the directional control button(s), if your machine is traction model.

2.Turn machine power off.

3.If an electrical problem is suspected push in emergency stop button, if machine is equipped with this option.

FILLING SOLUTION TANK

FOR SAFETY: Before leaving or servicing machine; stop on level surface, turn off machine and remove key.

1.Turn the machine power off.

2.Remove solution tank cover.

3.Fill the solution tank with clean water, leaving enough room for the required amount of cleaning solution. The solution tank capacity is 13 gallons (50 liters). The water must not be hotter than 140° F (60°C) to prevent damage to the tank.

MACHINE OPERATION

4.Measure the chemical into the solution tank. Liquid chemicals should be added to the solution tank after filling with water. Dry chemicals should be thoroughly mixed before being added into the solution tank.

Commercially available, high alkaline floor cleaners, are suitable for use in the solution system.

NOTE: Read the chemical manufacturers recommended proportion instructions.

5.Replace solution tank cover.

!

Flammable materials can cause an explosion or fire. Do not use flammable materials in the tanks.

NORMAL SCRUBBING

Plan the scrubbing pattern in advance. The longest track is around the perimeter of the area to be cleaned. For efficient operation, the runs should be the longest possible without turning, stopping, or raising and lowering scrub deck/squeegee.

NOTE: In order to achieve the best possible results, the area which is to be cleaned should be swept before scrubbing. Large debris, strings & wire must be removed to prevent being caught in the brush or squeegee.

SABER (SC) 86038350 01/29/07

3-10

 

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Walk Behind Scrubber Overview Machine Data LOG/OVERVIEWYour Dealer Table of Contents Model HOW to USE this ManualRead ALL Instructions Before Using this Machine Important Safety InstructionsHazard Intensity Level Hazard Intensity LevelSafety Decal 86252530 PRV no Safety Label LocationDIMENSION/CAPACITY Technical SpecificationsMeasure Special NotesHOW the Machine Works Components Controls NON-TRACTION Controls NON Traction Brush SwitchHour Meter Optional Circuit BreakersControls Traction Propel Buttons Normally Forward KEY SwitchEmergency SHUT-OFF Switch Optional Machine Operation Double Scrub To Begin ScrubbingTo Stop Scrubbing Solution Tank Emptying and Cleaning TanksBatteries MaintenanceMaintenance + red Blk Scrub Brushes Replacing or Installing Scrub BrushesUncoated Floors Finished FloorsMaintenance Adjusting Deluxe Squeegee To Remove Squeegee AssemblySqueegee Blades To Replace Squeegee BladesTo Adjust Amount of Rear Squeegee Deflection To Adjust Squeegee PitchTo Replace or Rotate Rear Squeegee Blade To Replace or Rotate Front Squeegee BladeHRS Maintenance Service ScheduleProblem Cause Machine TroubleshootingProblem Cause Solution

SC20T, SC20, SCC20, SCXC20T, SCX20T specifications

Windsor SCC20, SC20, SCC20T, SCX20T, and SC20T represent a remarkable range of innovative cleaning equipment designed primarily for commercial and industrial use. These models, known for their rugged build and advanced technology, cater to various surface cleaning needs in settings like warehouses, retail spaces, and factories.

One of the standout features of the Windsor SCC20 series is its powerful cleaning capability. The machines are equipped with high-performance vacuum motors that ensure effective suction, allowing for the collection of dirt, debris, and moisture in one pass. This efficiency not only saves time but also enhances the overall cleaning experience. The SC20T and SCC20T variants take this efficiency further with their upgraded features, enabling them to handle even tougher grime and larger debris with ease.

In terms of technology, the Windsor models integrate user-friendly controls and ergonomic designs. The adjustable handle ensures comfort during prolonged use, while the intuitive control panel simplifies operation, allowing staff to operate the machines without extensive training. The SCC20T and SCX20T further boast advanced filtration systems, capturing airborne particulate matter, which is crucial for maintaining a healthier working environment.

Another critical characteristic is the durability of these machines. Built with robust materials and designed to withstand harsh conditions, the SCC20 series is particularly favored in high-traffic areas. Maintenance is also user-friendly, with easy-access ports for troubleshooting and quick repairs. This feature significantly reduces downtime during cleaning operations, making them reliable partners in maintaining cleanliness.

Windsor's commitment to environmental sustainability is evident in its cleaner formulations and energy-efficient motors. The SCC20 and related models operate with reduced noise levels, which is particularly beneficial in settings where noise pollution is a concern.

In summary, the Windsor SCC20, SC20, SCC20T, SCX20T, and SC20T are standout cleaning solutions characterized by their powerful performance, user-friendly design, and durability. With advanced technologies aimed at increasing efficiency and maintaining a healthier workspace, these models exemplify Windsor's dedication to delivering top-tier cleaning equipment that meets the diverse needs of various industries. Whether for daily maintenance or deep cleaning tasks, the SCC20 series provides a comprehensive approach to effective cleaning solutions.
Top Page Image Contents