Niles Audio manual Placement of the ZR-4 Multizone Receiver, Installation Considerations

Hand-Held Learning Remote Control

1)Source Select Keys – Pressing one of the keys selects the built-in AM/FM tuner or any of the up to three connected (SRC 2-4) sources for playback and operation. There are also additional Source Select Keys to operate a TV and an auxiliary component such as a DVD player connected to the TV. The LED in the Source Key provides feedback.

2)On and Off Keys – Turns the selected device On or Off

3)Setup Key – This key is used to configure the remote

4)Transport Keys – Used to skip backward, rewind, fast forward, skip forward, stop, pause, or play tracks from the selected source

5)Menu Key – Press this key to display a menu for the selected source

6)Info Key – Press this key to display the current channel and program information

7)Menu Cursor Keys – Use these keys to move the cursor in the menu screen. Press OK to choose the highlighted menu option or to toggle between the AM and FM tuner bands

8)Volume Keys – These keys are used to raise or lower the sound level. Press the Mute key to turn the sound off or on

9)Channel Select Keys – These keys are used to select the next or previous channel and to select next or previous chapter on some models of DVD players. Press the Last key to recall the last-viewed channel

10)Guide Key – Press this key to display the program guide for the selected source

11)Exit Key – Press this key to exit the selected source’s menu, guide, or program without making a menu selection

12)Direct Access Keys – Directly enter channels (for example: 09 or 31). Press the Enter key to send channel number entry on certain TV models

13)Extended Function Keys – Provide additional functionality for advanced features, menus, and guides

14)DVR Function Keys – Support advanced functions for many DVR’s.

3

2

		SETUP
1	AM/FM	TV

OFF

SRC2AUX

SRC3 SRC4

LIST

4

5					6
	MENU			INFO
10		OK			7
	VOL	GUIDE		CH
8					9
		EXIT
	MUTE			LAST
					11
14	1	2		3
	4	5		6
	7	8		9	12
	INPUT	0		ENTER
13	REPLAY	DISC	PG+	LIVE
	GROUP	RANDOM	PG–	FAV
	PREV			NEXT

Installation Considerations

PLACEMENT OF THE ZR-4 MULTIZONE RECEIVER

Place the ZR-4 MultiZone Receiver on a flat, level surface such as a table or shelf, with its weight equally distributed on each of its four feet. Placing the weight of the receiver on the rear or front panel for even an instant may result in damage to the receiver’s connectors and controls. Like any high-fidelity component, the ZR-4 MultiZone Receiver will last much longer if it is given adequate ventilation for proper cooling. When installing the ZR-4 MultiZone Receiver in a cabinet, be sure that the rear of the cabinet is open to receive fresh air in order to provide proper cooling. Place the ZR-4 MultiZone Receiver so it has air space above it (minimum 1.75”). If this is not possible, we suggest adding an optional Niles FM-1 or FM-1R System Cooling Module. If the receiver is located on a carpeted surface, place a board under the receiver’s feet. Do not block the ventilation holes on the top and bottom. When installed in a professional rack using the rack mounting ears, provide a minimum of 1 unit space above and below the ZR-4.

(continued on next page)

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373 5