Niles Audio ZR-4 manual Erasing Tuner Preset Information, Restoring the Factory Defaults

DEFAULT TURN-ON VOLUME

The turn-on volume level for the system is adjustable. Since the turn-on volume level will be the same for all zones, we suggest setting a comfortable listening level in the room that will be used most frequently, or in the smallest room.

While in the configuration mode, (see above) press the Set Key until [ DEFAULT TURN ON VOLUME = 60 ] shows in the display.

D E F A U L T T U R N O N

V O L U M E = 6 0

Press the + key to increase the preset volume. Press the – key to decrease the preset volume. The factory default setting is 60.

D E F A U L T T U R N O N

V O L U M E = 5 5

The volume range is from 0 to 99. Hold Set key 2 seconds to save new turn-on volume.

To continue to the next system configuration Zone 4 Speakers, press the Set key once. To save your settings and to exit the configuration mode, simultaneously hold down the Band and Set keys. [ Release Buttons to Continue ] appears on the display. The ZR-4 will return to normal operating mode.

R E L E A S E B U T T O N S

T O C O N T I N U E

Zone 4 Speakers

The ZR-4 MultiZone Receiver is equipped with Zone 4 pre-amplifier output that enables the use of a separate outboard power amplifier. The ZR-4’s built-in Zone 4 amplifier is still operational but requires this configuration adjustment to ensure the best sound quality if speakers are connected to it.

While in the configuration mode, (see above) press the Set Key until [ ZONE 4 SPEAKER INSTALLED ] shows in the display.

Z O N E 4 S P E A K E R

I N S T A L L E D

[ ZONE 4 SPEAKER INSTALLED ] is the default setting. If speakers are not connected to Zone 4’s built-in amplifier, press the Band key and the display will show [ ZONE 4 SPEAKER NOT INSTALLED ].

Z O N E 4 S P E A K E R

N O T I N S T A L L E D

To return back to the first system configuration Master Slave, press the Set key 3 times. To save your settings and to exit the configuration mode, simultaneously hold down the Band and Set keys. [ Release Buttons to Continue ] appears on the display. The ZR-4 will return to normal operating mode.

Erasing Tuner Preset Information

While in configuration mode, press the Set button until the display shows [ERASE PRESETS?]

E R A S E P R E S E T S ?

- / N O + / Y E S

Press + to erase all 20 tuner presets stored into the ZR-4. The display will show [PRESETS ERASED].

P R E S E TS E R A S E D

Press the – button to exit and move to the next step without erasing any of the presets.

To continue to the next configuration step, Restoring Factory Defaults, press the Set button.

To save the settings and exit configuration mode, simultaneously hold down the Band and Set buttons. After the ZR-4 saves the information, [RELEASE BUTTONS TO CONTINUE] appears on the display. The ZR-4 will return to the normal operating mode.

Restoring the Factory Defaults

While in configuration mode, press the Set button until [factory reset] appears on the display.

F A C T O R Y R E S E T

- / N O + / Y E S

Press + to erase all configuration data. All Master/Slave, zone linking, paging, party mode, bass, treble, and loudness settings will return to the factory default. The display will show [CONFIRM ERASE].

C O N F I R M E R A S E

- / N O + / Y E S

20 NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373