Niles Audio manual ZR-4MultiZone Receiver, Contents, parts guide

CONTENTS

After unpacking and before installation, the installer should carefully inspect the contents. If any damage is discovered due to shipping, the installer should contact Niles for assistance (see back cover or Warranty Card for contact information.) Also, keep all packing materials in case the product needs to be returned to the factory.

•	(1)	ZR-4 MultiZone Receiver	•	(1)	Safety Sheet
•	(1)	Removable North American Power Cable	•	(1)	Installation Manual
•	(2)	Rack Mount Ears	•	(1)	FM Dipole Antenna
•	(4) Weather-Resistant Keypads		•	(1) AM Loop Antenna
•	(1)	R-6L Hand-Held Learning Remote Control	•	(1)	Installation Guide
•	(3)	Infrared MicroFlashers®	•	(1)	List of R-6L Setup Codes

parts guide

ZR-4 MultiZone Receiver

		2	3	4	Front Panel
1	2	3	4
Z R - 4 M u l t i Z o n e R e c e i v e r
			BAND SET
			1

1) Main Power Switch – This push-button, latching switch turns the main power to the ZR-4 MultiZone Receiver ON and OFF

2) LED Zone ON/OFF Indicators – Individually illuminate when the corresponding zone is active and turn off when the zone is in standby

3) Band, Set, Tune –, and Tune + Push Buttons – Used to operate the AM/FM tuner, set favorite preset stations into memory, and perform system configuration operations

4) Backlit LCD Display –This two-line, 16-character, LCD display shows tuner preset and setup information, plus current tuner preset, band, and station tuning

6 7 8 10 15 Rear Panel

	KEYPADS		MICROFLASHERS®	HT Sync	AUDIO INPUTS
Expansion	1	2	3		L
		2
					Page
					AM/FM

3	4 4				R
	High Output	12 V	RS 232	IR In	2	3	4
	Flasher	Trigger		Global

5
	9	11	12		14
				13

ZONE 1	ZONE 2	ZONE 3	ZONE 4	120 Volts ~ 60Hz. 200 Watts Max.
8 Ω (4 Ω Min.)	8 Ω (4 Ω Min.)	8 Ω (4 Ω Min.)	8 Ω (4 Ω Min.)	L
Speaker Outputs	Speaker Outputs	Speaker Outputs	Speaker Outputs

L+

L-

R-

R+

L+

L-

R-

R+

L+

L-

R-

R+

L+

L-

R-

R+

R

Pre Out

Fix

Var

Double Insulated

When servicing use only

identical replacement parts.

16 17 18

5) Expansion Connection – This RJ-45 connector allows data to be carried between a Master and Slave ZR-4 over CAT-5 cable to create an eight-zone system

6) Keypad Ports – Four zone-specific RJ-45 connector ports connect to each zone’s keypad with CAT-5 cable using the T568A wiring convention

7) Flasher Outputs – Four 3.5mm connectors. The three supplied Infrared MicroFlashers® connect to flasher outputs 2-4 and then attach to each source component’s respective IR window. The High Output Flasher Port is to be used only with an optional Niles IRB1 High Output IR Flasher to control an entire stack of source components. Do not connect MicroFlashers® to the High Output Flasher Port.

8) HT (Home Theater) Sync – This 3.5mm connector lets the ZR-4 know when a home theater system is On. The ZR-4 will not go into standby even if all of its zones are off until this voltage is eliminated

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373 3