Niles Audio ZR-4 manual Page Mode Volume, Party or Whole House Mode

to that input until a signal is no longer detected. The paging input will play in all zones at the preset volume. If there are zones that the end- user does not desire to receive a page, follow these steps.

While in the configuration mode (see above). Press the Set Key until [ 1234 PAGE MASTER ] shows in the display. A cursor will be blinking under the number “1.”

1	2	3	4			P	A	G	E
P	P	P	P	M	A	S	T	E	R

Press the + key to toggle between the zones to highlight a paging zone. The cursor under the zone number blinks when a zone is highlighted.

Press the Band key to deselect a highlighted zone as a paging zone. A [ P ] will disappear below that zone number.

Once you reach “4” it will toggle back to “1” on the Slave. Once you have reached “4” on the Slave it will toggle back to “1” on the Master.

1	2	3	4			P	A	G	E
P		P		M	A	S	T	E	R

Repeat these steps until all of the desired zones have been set for your desired paging operation.

To continue to the next system configuration Party or Whole House Mode, press the Set key once. To save your settings and to exit the configuration mode, simultaneously hold down the Band and Set keys. [ RELEASE BUTTONS TO CONTINUE ] appears on the display. The ZR-4 will return to normal operating mode.

R E L E A S E B U T T O N S

T O C O N T I N U E

Party or Whole House Mode

This feature lets the end-user press-and-hold any Master Key for three seconds to turn On the entire house to the same source for a party. It also allows for the press-and-hold of the Off key to turn Off the entire system from one zone keypad without the need to walk around to every keypad to do so. By default all zones will respond to Party mode. If there are zones that the end-user does not want to turn on when a press-and-hold is initiated, follow these steps.

Note: this feature only deactivates the press-and-hold On and not the Off. The Off is always available at any zone regardless of its setting.

While in the configuration mode, (see above) press the Set Key until [ 1234 PARTY MASTER ] shows in the display. A cursor will be blinking under the number “1.”

1	2	3	4		P	A	R	T	Y
W	W	W	W	M	A	S	T	E	R

Press the + to toggle between the zones. The cursor under the zone number blinks when a zone is highlighted.

Press the Band key to deselect a highlighted zone as a Party zone. A [ W ] will disappear below that zone number.

Once you reach “4” it will toggle back to “1” on the Slave. Once you have reached “4” on the Slave it will toggle back to “1” on the Master.

1	2	3	4		P	A	R	T	Y
W		W		M	A	S	T	E	R

Repeat these steps until all of the desired zones have been set for your desired Party operation.

To continue to the next system configuration Page Mode On Volume, press the Set key once. To save your settings and to exit the configuration mode, simultaneously hold down the Band and Set keys. [ Release Buttons to Continue ] appears on the display. The ZR-4 will return to normal operating mode.

R E L E A S E B U T T O N S

T O C O N T I N U E

Page Mode Volume

The paging volume level for all selected zones is adjustable.

While in the configuration mode, (see above) press the Set Key until [ PAGE MODE VOLUME = 60 ] shows in the display.

P A G E M O D E

V O L U M E = 6 0

Press the + key to increase the preset volume. Press the – key to decrease the preset volume. The factory default setting is 60.

P A G E M O D E

V O L U M E = 3 4

The volume range is from 0 to 99. Hold the Set key 2 seconds to save the new page volume.

To continue to the next system configuration Default Turn On Volume, press the Set key once. To save your settings and to exit the configuration mode, simultaneously hold down the Band and Set keys. [ Release Buttons to Continue ] appears on the display.

R E L E A S E B U T T O N S

T O C O N T I N U E

The ZR-4 will return to normal operating mode.

(continued on next page)

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373 19