Windsor WAV 10125050 operating instructions Operation, HOW IT Operates

Page 10

OPERATION

HOW IT OPERATES

This machine is a portable, easy to use wide area vacuum designed for use indoors, in a commercial or light industrial environment.

When operating as a carpet vacuum, soil is lifted from the carpet surface by a rotating brush and carried into a removable bag by the vacuum motors.

 

 

1.

 

 

Large debris such as paper cups, plates, etc.,

 

 

 

 

 

 

 

 

 

should be picked up before starting the cleaning

 

 

 

 

 

 

 

 

 

process.

 

 

2.

 

 

Plan your cleaning route to work away from the

 

 

 

 

 

 

 

 

electrical source. Move machine forward at a

 

 

 

 

 

 

 

 

steady pace.

 

 

 

 

CLEANING

 

 

1.

 

 

Adjust handle to comfortable position at waist

 

 

 

 

 

 

 

 

 

level or higher.

 

 

2.

 

 

Use your finger to depress the Vacuum switch at

 

 

 

 

 

 

 

 

 

the base of the handle to activate the vacuum.

 

 

3.

 

 

To adjust brush height, move the Brush

 

 

 

 

 

 

 

 

 

Adjustment lever on the right side to the correct

 

 

 

 

 

 

 

 

 

setting for the carpet being vacuumed. Lower

 

 

 

 

 

 

 

 

 

brush gradually until firm brush contact is heard.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BRUSH POSITION

 

 

 

 

 

!

 

 

WARNING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

KEEP MACHINE MOVING WHILE BRUSH ENGAGED.

 

 

 

 

DAMAGE TO CARPET COULD OCCUR IF NOT

 

 

 

 

MOVING.

 

 

 

 

NOTE: Always return brush to storage position after

 

 

 

 

using machine.

 

 

4.

 

 

Depress the brush lever at the handle to start the

 

 

 

 

 

 

 

 

 

brush.

 

 

5.

 

 

Move forward at a steady pace for through

 

 

 

 

 

 

 

 

 

cleaning. Run machine more slowly over

 

 

 

 

 

 

 

 

 

extremely soiled areas.

 

 

 

 

 

 

 

 

 

 

 

6.

 

 

Use the right side of the machine for edge

 

 

 

 

 

 

 

 

 

cleaning.

 

 

 

7.

 

 

To use the accessory wand and detail tools,

 

 

 

 

 

 

 

 

 

depress the foot lever in the back of the machine.

 

 

 

8.

 

 

To keep the vacuum operating at maximum

 

 

 

 

 

 

 

 

 

efficiency, check the dust bag regularly. Empty

 

 

 

 

 

 

 

 

 

when 1/2 to 3/4 full. Always use with disposable

 

 

 

 

 

 

 

 

 

paper bag for best results.

 

 

 

9.

 

 

When finished vacuuming, coil the cable by hand

 

 

 

 

 

 

 

 

 

by looping into about a 3 foot diameter, Hang

 

 

 

 

 

 

 

 

 

coiled cable over handle. Wrap the end around

 

 

 

 

 

 

 

 

 

the cable loop to secure.

 

 

 

10.

 

 

Return brush to storage position.

 

 

 

 

 

 

 

 

 

 

 

 

3-3

WAV 86038510 05/15/07

 

Image 10
Contents Beginning with Serial No Machine Data LOG/OVERVIEW ModelTable of Contents HOW to USE this Manual ModelImportant Safety Instructions Hazard Intensity Level Grounding Instructions ElectricalAccessory vacuum hose and wand. Allows ControlsWave SET UP OperationsOperation HOW IT OperatesMaintenance To Access BELT/BRUSH MotorDaily Maintenance Wiring Diagram RED Motor BLKMaintenance Service Schedule Maintenance Daily Weekly Monthly QuarterlyThis page Left Blank Intentionally Vacuum Door Assembly Brush and Drive GroupBrush and Drive Group Parts List Bearing BlockBrush Height and Wheel Group Brush Height and Wheel Group Parts List WHEEL, 1-5/8D CushionVacuum Group Vacuum Group Parts List Handle Group Handle Group Parts List LOCK, HandleLID/DECAL Group LID/DECAL Group Parts List Electrical Panel and Cover Group Electrical Panel & Cover Group Parts List Suggested Spare Parts