Windsor WAV 10125050 operating instructions Grounding Instructions, Electrical

Page 7

THIS PRODUCT IS FOR COMMERCIAL USE ONLY.

ELECTRICAL:

In the USA this machine

operates on a

standard 15 amp 115V, 60

hz, A.C. power

circuit . The amp, hertz, and

voltage are listed

on the data label found on each machine. Using voltages above or below those indicated on the data label will cause serious damage to the motors.

EXTENSION CORDS:

If an extension cord is used, the wire size must be at least one size larger than the power cord on the machine, and must be limited to 50 feet (15.5m) in length.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the plug in “Fig. A”. A temporary adaptor that looks like the adaptor in “Fig . C” may be used to connect this plug to a 2-pole receptacle as shown in “Fig. B”, if a properly grounded outlet is not available. The temporary adaptor should be used only until a properly grounded outlet (Fig. A) can be installed by a qualified electrician. The green colored rigid ear, lug, or wire extending from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by a metal screw.

GROUNDING INSTRUCTIONS

Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

WAV 86038510 05/15/07

2-3

 

Image 7
Contents Beginning with Serial No Model Machine Data LOG/OVERVIEWTable of Contents Model HOW to USE this ManualImportant Safety Instructions Hazard Intensity Level Electrical Grounding InstructionsControls Accessory vacuum hose and wand. AllowsOperations Wave SET UPHOW IT Operates OperationTo Access BELT/BRUSH Motor MaintenanceDaily Maintenance RED Motor BLK Wiring DiagramMaintenance Daily Weekly Monthly Quarterly Maintenance Service ScheduleThis page Left Blank Intentionally Brush and Drive Group Vacuum Door AssemblyBearing Block Brush and Drive Group Parts ListBrush Height and Wheel Group WHEEL, 1-5/8D Cushion Brush Height and Wheel Group Parts ListVacuum Group Vacuum Group Parts List Handle Group LOCK, Handle Handle Group Parts ListLID/DECAL Group LID/DECAL Group Parts List Electrical Panel and Cover Group Electrical Panel & Cover Group Parts List Suggested Spare Parts