|
|
| OPERATIONS | |
|
| WAVE SET UP | ||
| 1. | Take machine out of storage position by lowering | ||
|
|
| onto all four wheels. | |
| 2. | Adjust handle to comfortable position at waist level | ||
|
|
| by opening adjustment lever on left side of | |
|
|
| machine and moving handle. Lock back into | |
|
|
| position by closing adjustment lever. | |
| 3. | Install cloth filter bag inside the main body by | ||
|
|
| pushing the rubber collar over the chute. | |
| 4. | Unzip the cloth bag and place the paper bag | ||
|
|
| inside. Push the rubber gasket seal over the | |
|
|
| chute. Zip cloth bag closed taking care not | |
FILTER/BAG COMPARTMENT |
|
| to damage the paper bag and close lid. | |
5. | Attach the detail tools to the top of the dust bag | |||
| ||||
|
|
| cover by pressing the appropriate tool into the | |
|
|
| clips. | |
| 6. | Take the accessory wand and attach to the hose | ||
|
|
| and insert wand into the wand holster. | |
| 7. | Strain relief. | ||
|
| NOTE: Attach strain relief/cord retainer to the | ||
|
| power cord. | ||
| 1. | Make a loop in power cord approximately | ||
|
|
| 12” from receptacle end. | |
|
| 2. | Slide cord loop through slot in retainer arm. | |
|
| |||
|
| |||
|
|
| Pull slack cord back through slot to secure. | |
|
|
| Attach retainer to handle. | |
|
|
|
| |
WAV 86038510 05/15/07 | |
|