AT&T ATTTL92273 user manual Bluetooth setup

Bluetooth

Bluetooth setup

6.Press NEXT to turn on the telephone base discoverable mode. The screen displays Set cell to search base: AT&T DECT 6.0 PIN: 0000.

7.Promptly turn on the Bluetooth feature of your cell phone and search for or add new devices. Once your cell phone finds your AT&T phone (AT&T DECT 6.0), press the appropriate key on your cell phone to continue the pairing process.

•Your cell phone may require a passcode. In this case the handset screen displays Check cellular. ENTER PASS CODE. Enter the cell phone passcode (typically 0000) into the handset and

press SET.

•Enter the PIN of the telephone base (the default PIN is 0000) into your cell phone to continue the pairing process if required. The handset displays Adding Cell Phone A.

When a device is successfully connected, the handset displays Cell Phone A is added and connected to base. You hear a confirmation tone. The corresponding status icon ( 1 or 2) displays on the handset. The corresponding device light on the telephone base (CELL 1 or CELL 2/HEADSET) turns on.

Adding

Cell Phone A

to device

list...

1

Cell Phone A

is added

and connected

to base.

If you have trouble pairing your cell phone, it may not be compatible with your TL92273/TL92373/TL92473. Check the Bluetooth compatibility list at

www.telephones.att.com/bluetooth.

NOTES:

•The pairing process may take up to one minute. If the pairing process fails, try again.

•If you put the handset back in the telephone base or charger while pairing, the process is cancelled and the handset returns to idle mode.

•If a device fails to connect, the handset displays Cell Phone A is added to device list, and then displays Please use cell to connect to base.

•Refer to the user’s manual of your cell phone on how to search for or add a new Bluetooth device.

17