AT&T ATTTL92273 user manual Bluetooth setup, Press Idle mode

Bluetooth

Bluetooth setup

To use a Bluetooth enabled cellular phone or headset with your telephone, you must first pair and connect your Bluetooth cellular phone or headset with the telephone base. The TL92273/TL92373/TL92473 can then be used to make or answer calls on the cell phone line.

Bluetooth wireless technology operates within a short range (up to 30 feet). When you pair a Bluetooth cell phone or Bluetooth headset to the telephone base, keep the device within 15 feet of the telephone base for optimal performance.

Add a cell phone

Before you begin, make sure that you have cellular coverage and your Bluetooth enabled cell phone is not connected to any other Bluetooth device. Refer to your cell phone user's manual to learn how to search for or add new Bluetooth devices.

To pair and connect a cell phone:

Using a cordless handset:

1.	Press			in idle mode.
		MENU
2.	Press CID or DIR to highlight Bluetooth, then press
	SELECT		.

3.Press SELECT to choose Add device.

4.Press SELECT to choose Add cellular. The screen displays Please wait... followed by 1. If cell is connected to BT device, please disconnect it.

•If there are already 4 paired devices on the device list, the 4th device on the device list will be automatically removed, regardless of whether the new device pairing is successful or not.

•If there are already 2 active devices on the device list with prefix D1: or D2:, the handset shows

Cell Phone/Headset B is deactivated for adding a new device.

5.Press NEXT. The screen displays 2. Place cell phone next to base.

•All devices that are connected to the telephone base are disconnected until the pairing process is completed.

Directory Caller ID log Intercom Bluetooth

BACK SELECT

BLUETOOTH Add device Device list Download dir

BACK SELECT

ADD DEVICE

Add cellular Add headset

BACK SELECT

Set cell to

search base: AT&T DECT 6.0 PIN:0000

16