AT&T ATTTL92273 user manual Change a one-to-one PTT call to an intercom call, End a PTT call

Multiple handset

Push-to-talk (PTT)

Change a one-to-one PTT call to an intercom call

You can convert a one-to-one PTT conversation to an intercom call.

1.When your handset displays Press and hold [PTT] to talk, press INTCOM. Your handset displays Switch to Intercom? Press SELECT to confirm.

•If you have a two-handset system, your handset displays Calling other handset. The destination handset temporarily displays Push to talk Ended and then Other handset is calling.

•If you have three or more handsets, your handset displays Calling HANDSET Y (Y represents the destination handset number). The destination handset temporarily displays Push to talk Ended and then HANDSET X is calling (X represents the originating handset number).

2.On the destination handset, press HOME/FLASH, /SPEAKER, CELL 1,

CELL 2 or any dialing key (0-9or TONE ) to answer the intercom call. Both handsets now display Intercom.

3.To end the intercom call, press OFF/CANCEL or place the handset in the telephone base or charger. Both handsets display Intercom ended.

End a PTT call

•For a one-to-one PTT call, both the originating and destination handsets can end the PTT call.

•For one-to-group PTT calls, the initiating handset can end the PTT call for the group of handsets on that PTT call. If any one of the destination handsets leaves the PTT call, the call continues until all participants or the initiator hangs up.

To end or leave PTT:

Press OFF/CANCEL or place the handset in the telephone base or charger. The handset displays Push to talk Ended.

NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.

60