Answering system

Answering system settings

Use the answering system menu of a system handset to set up the announcement message, turn the answering system or message alert tone on or off, activate call screening, or change the number of rings, remote access code or message recording time. If you turn off the answering system and you change any setting in the answering system setup menu, the answering system automatically turns on again.

Announcement

Your outgoing announcement plays when calls are answered by the answering system.

The telephone has a default outgoing announcement, “Hello, please leave a message after the tone.” You can use this default announcement, or record your own.

You can record an announcement up to 90 seconds. The system does not record any announcement shorter than two seconds.

To play your current outgoing announcement:

1.

Press

 

 

in idle mode.

MENU

2.

Press

CID or

DIR to highlight Answering sys, then press

 

 

.

 

 

SELECT

 

3.

Press

 

again to select Announcement.

SELECT

4.

Press

CID or

DIR to highlight Play annc, then press

SELECT.

ANSWERING SYS Announcement Delete all old Record memo

BACK SELECT

ANNOUNCEMENT Record annc Play annc Reset annc

BACK SELECT

Playing

announcement...

RECORD STOP

77

Page 83
Image 83
AT&T ATTTL92273 user manual Answering system settings, Announcement, To play your current outgoing announcement