AT&T ATTTL92273 user manual Change PIN, To change the PIN, Cell ringer

Bluetooth

Bluetooth setup

Change PIN

You are required to enter a PIN when establishing a Bluetooth connection. The default Pin of your telephone base is 0000.

To change the PIN:

1.Press MENU on the handset in idle mode to enter the main menu.

2.Press CID or DIR to highlight Bluetooth, then press SELECT.

3. Press CID or DIR to highlight Change PIN, then press SELECT. The handset displays ENTER NEW PIN and the existing PIN.

4.Use the dialing keys to enter a new 4-digit code.

•Press MUTE/DELETE to erase a digit.

•Press and hold MUTE/DELETE to erase all digits.

• Press CID or DIR to move the cursor to the right or left.

5. Press SET to save. You hear a confirmation tone.

Cell ringer

BLUETOOTH Device list Download dir Change PIN

BACK SELECT

ENTER NEW PIN

0000

BACK SET

If this feature is on and you have connected an iPhone (iOS 4.1 or later) to your telephone system, the telephone plays your iPhone ringtone when there is an incoming call.

1. Press MENU in idle mode.

2.	Press	CID or	DIR to highlight Bluetooth, then press
		.
	SELECT
3.	Press	CID or	DIR to highlight Cell ringer, then press
		.
	SELECT

4.If there is more than one paired device on the device list,

press CID or DIR to highlight the desired device, then press SELECT . Otherwise, skip to the next step.

5.Press CID or DIR to choose On or Off, then press SET .

NOTE: The quality of ringtone played on your telephone is subject to individual ringtone characteristics.

BLUETOOTH Download dir Change PIN Cell ringer

BACK SELECT

CELL RINGER On

Off

BACK SET

27