AT&T ATTTL92273 user manual Message alert tone, To change the setting

Answering system

Answering system settings

Message alert tone

When the message alert tone is set to On, and there is at least one new message, the telephone base beeps every 10 seconds. The tone stops when all new messages have been reviewed. By default, the message alert tone setting is Off.

To change the setting:

1.	Press				in idle mode.
		MENU
2.	Press		CID or				DIR to highlight Answering sys, then press
				.
	SELECT
3.	Press		CID or				DIR to highlight Ans sys setup, then press
				.
	SELECT
4.	Press		CID or				DIR to highlight Msg alert tone, then press
				.
	SELECT
5.	Press		CID or				DIR to choose between On and Off, then
	press					.
			SELECT

NOTES:

ANS SYS SETUP

#of rings Remote code Msg alert tone

BACK SELECT

MSG ALERT TONE On

Off

BACK SELECT

•To temporarily turn off the message alert tone, see page 87.

•The message alert tone beeps only if all the conditions below are met.

–Answering system is on.

–Message alert tone setting is on.

–There are new messages.

83