Panasonic DMC-ZS5, DMC-TZ8 Resolution, No burst, Burst Pictures/sec Fine Max Standard Max

For [REC] menu setting procedures (→20)

[BURST]

Enables a rapid succession of still pictures to be taken. Succession of still pictures taken while shutter button is held down.

■Recording Mode:

■Settings:

[BURST] setting		Speed		No. of pictures∗
[OFF]			No burst
	(Burst)	2.3 pictures/sec.		Fine: Max. 3
				Standard: Max. 5

∗When using self-timer: Fixed at 3 pictures

●Focus, exposure and White Balance are fixed in the first picture.

●Burst speed may be reduced if [SENSITIVITY] is set to high, or if shutter speed is reduced in darker locations.

●When burst setting is used, flash is set to [FORCED FLASH OFF], and [AUTO BRACKET], [MULTI ASPECT], and [AUDIO REC.] settings are cancelled.

●When burst is performed with the built-in memory, writing will take some time. ●Settings will be stored even if power is turned off.

●Auto Review performed regardless of [AUTO REVIEW] setting.

●Burst is not available in the Scene Modes [TRANSFORM], [PANORAMA ASSIST], [HI- SPEED BURST], [FLASH BURST], [STARRY SKY], [PIN HOLE], [FILM GRAIN], [HIGH DYNAMIC],and [PHOTO FRAME].

●Using the [HI-SPEED BURST] Scene Mode allows a faster succession of still pictures to be taken. [FLASH BURST] is convenient to take continuous still pictures using flash in dark places.

[I.RESOLUTION]

Super resolution technology can be used to record still pictures with sharper outlines and clearer resolution. Also, when [i.ZOOM] is set, the zoom ratio can be increased to about

1.3with almost no deterioration of picture quality.

■Recording Mode:

■Settings: [OFF]/[ON]/[i.ZOOM]

●About i.ZOOM (→41)

●The setting is fixed to [i.ZOOM] in ([INTELLIGENT AUTO] Mode) and ([CLIPBOARD] Mode).

●The setting is fixed to [ON] in [HIGH SENS.] and [HI-SPEED BURST] Scene Modes, [OFF] in [FLASH BURST] and [PIN HOLE] Scene Modes, and [i.ZOOM] in other Scene Modes.

VQT2R48 103