Panasonic DMC-TZ10 Reset Reset REC. SETTINGS?, Reset Setup PARAMETERS?, Video OUT NTSC/PAL

Using the [SETUP] menu (Continued)

For details about the setting procedure in the [SETUP] menu (→20)

Item	Settings, notes
[RESET]	[RESET REC. SETTINGS?]
	[YES]/[NO]
Reset to the default
settings.	[RESET SETUP PARAMETERS?]
	[YES]/[NO]

•Information registered in [FACE RECOG.] is reset if recording settings are reset.

•Resetting the setup parameters will also reset the following.

Age in years/months and names in [BABY] and [PET] Scene Modes, any settings in the [TRAVEL MODE]

menu (including GPS function) , [FAVORITE] in the [PLAYBACK] menu (set to [OFF]), [ROTATE DISP.] (set to [ON])

•Folder numbers and Clock settings will not be reset.

•Camera movement may be audible as the lens function is reset. This is not a fault.

	[USB MODE]		[SELECT ON CONNECTION]:
Select communication		Select [PC] or [PictBridge (PTP)] each time you connect to
		a computer or PictBridge-compatible printer.
method for when
			[PictBridge (PTP)]: Select when connecting to a
connecting camera to a
computer or printer with				PictBridge-compatible printer.
USB connection cable.			[PC]: Select when connecting to a computer.
	[VIDEO OUT]	[NTSC]/[PAL]
Change the video output		If the default setting is changed, AVCHD Lite motion
format when connected		pictures may not be played correctly.
to a TV, etc. (Playback		• Operates when AV cable is connected.
Mode only).
	[TV ASPECT]	/
Change the aspect ratio		• Operates when AV cable is connected.
when connected to a
TV, etc. (Playback Mode
only).

26 VQT2R48