Panasonic DMC-TZ10 Inserting and removing the card optional/ the battery, Close lid, To remove

Inserting and removing the card (optional)/ the battery

Lever

Do not touch terminal

Charged battery (check orientation) Card (check orientation: terminals face LCD)

Set the camera ON/OFF switch to OFF

Slide to the [OPEN] position and open the lid

Release lever

[OPEN] [LOCK]

Completely insert battery and card

•Battery: Push in until the lever is locked

•Memory card: Push in until it clicks

Close lid

Slide to the [LOCK] position.

■To remove

• To remove battery:		• To remove card:
move lever in	Lever	press down in
direction of arrow.		centre.

●Always use genuine Panasonic batteries.

●If you use other batteries, we cannot guarantee the quality of this product. ●Remove battery from camera after use.

• Store the battery in battery carrying case (supplied).

●To remove the card or battery, turn the camera off and wait until the LUMIX indicator on the LCD monitor goes off. (Failure to wait may cause the camera to malfunction and may damage the card or recorded data.)

●Keep the Memory Card out of reach of children to prevent swallowing.

14 VQT2R48