Panasonic DMC-TZ10, DMC-TZ8, DMC-ZS5 operating instructions No Battery Power Remains

Meanings of and required responses to major messages displayed on LCD monitor.

[MEMORY CARD ERROR] [MEMORY CARD PARAMETER ERROR]

●Card is not of SD standard.

●When cards in capacities of 4 GB or more are used, only SDHC or SDXC memory cards are supported.

[READ ERROR]/[WRITE ERROR] [PLEASE CHECK THE CARD]

●Data read has failed.

→Check whether card has been inserted correctly (→14).

●Data write has failed.

→Turn off power and remove card, before re-inserting and turning on power again.

●Card may possibly be damaged.

●Try with a different card.

[CANNOT RECORD DUE TO INCOMPATIBLE FORMAT(NTSC/PAL) DATA ON THIS CARD.]

●A card that has been used in another camera to record an AVCHD motion picture in a different broadcast system cannot be used to record AVCHD Lite motion pictures with this camera.

→ Format the card with this camera. The data will be deleted.

[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE WRITING SPEED OF THE CARD]

●Using a card of SD speed ‘Class 4’∗ or above is recommended for recording motion pictures in [AVCHD Lite(GPS REC)]/[AVCHD Lite].

Using a card of SD speed ‘Class 6’∗ or above is recommended for recording motion pictures in ‘MOTION JPEG’.

∗ The SD speed class is a speed rating for continuous writing.

●If recording stops even when using the card above, the data writing speed is low. We recommend backing up the data on the memory card and reformatting it (→28).

●Motion picture recording may be automatically terminated with certain cards.

[A FOLDER CANNOT BE CREATED]

●Folder numbers in use have reached 999.

→Save all necessary data to computer (or other device), and [FORMAT] (→28). Folder number is reset to 100 when performing [NO.RESET] (→25).

[PICTURE IS DISPLAYED FOR 16:9 TV] [PICTURE IS DISPLAYED FOR 4:3 TV]

●AV cable is connected to camera.

→To remove message immediately → Press [MENU/SET].

→To change aspect ratio → Change [TV ASPECT] (→26).

●USB connection cable is only connected to camera.

→Message disappears when cable is also connected to another device.

[THIS BATTERY CANNOT BE USED]

●Use a genuine Panasonic battery.

●Battery cannot be recognised as terminal is dirty. → Wipe any dirt away from the battery terminal.

[NO BATTERY POWER REMAINS]

●The battery level is low.

→ Charge the battery before use. (→11)

[GPS FEATURE IS NOT AVAILABLE IN THIS REGION.]

●GPS may not work in China or in the border regions of countries neighboring China. (Current as of February 2010)

VQT2R48 155