82 VQT2R48 VQT2R48 83
Recording with the Face Recognition function
[FACE RECOG.] (continued)
Recording Mode:
Automatically register face pictures
You can set the camera so that the registration screen automatically displays after
recording a subject that is recorded many times.
Select [FACE RECOG.] from
the [REC] menu (→20)
Select [SET]
Select [AUTO
REGISTRATION]
Select [ON]
Press the shutter button
halfway to close the menu

●In some cases it may be very difficult

to recognise faces that have only been
registered by automatic registration.
From the [REC] menu’s [FACE RECOG.],
register face pictures in advance.

■Register face pictures from the automatic registration screen

Select [YES] from the registration confirmation screen
•If Face Recognition is not registered, proceed
to .
•If [NO] is selected, a re-confirmation screen is
displayed.
If [YES] is selected here, [AUTO
REGISTRATION] is turned to [OFF].
Select [NEW PERSON] or [ADDITIONAL IMAGE]
Item About settings
[NEW
PERSON] If 6 people are already registered, select a person to replace.
[ADDITIONAL
IMAGE] Select the person for which you are registering additional face
pictures
•If 3 face pictures are already registered, select a picture to
replace.
Select the item to edit and make the setting (Step ) (→80)

●The registration screen is displayed for the third time (estimate). (This does not occur

in [SELF PORTRAIT] Scene Mode, [BURST], [AUDIO REC.], [AUTO BRACKET] or
[MULTI ASPECT].)

●If the registration screen is not displayed easily, recording in the same environment and

with the same expression will make it display more easily.

●If a face is not recognised despite being registered, re-registering the person from

[REC] menu’s [FACE RECOG.] at that location will make it easier for the camera to
recognise the person.

●If the registration screen is displayed for a person already registered, making additional

registration of the person in that status will make it easier for the camera to recognise
the person.

●If a picture recorded with a flash is registered, it may be difficult for the camera to

recognise the person.

●When [AUTO REGISTRATION] is set to [ON], the [FACE RECOG.] setting is also

switched to [ON ] automatically.
Setting recognition sensitivity
The Sensitivity setting of the camera can be set if it is having difficulty with Face
Recognition or making mistakes.
Select [FACE RECOG.] from
[REC] menu (→20)
Select [SET]
Select [SENSITIVITY]
Select the level of a
sensitivity setting
[HIGH]: Set when camera
is having difficulty
recognizing faces
[NORMAL]: The usual setting
[LOW]: Set when the camera
frequently recognises
a face as that of a
different person
Press the shutter button
halfway to close the menu

●Setting [SENSITIVITY] at [HIGH] makes it easier for the camera to recognise faces but

also increases the possibility of recognizing the face as that of a different person.