Panasonic DMC-TZ8 REC Area, Economy Sleep Mode, OFF/2 MIN./5 MIN./10 MIN, LCD Power Save OFF/ON

Using the [SETUP] menu (Continued)

For details about the setting procedure in the [SETUP] menu (→20)

			Item	Settings, notes
		[REC AREA]		[OFF]/[ON]	This section is not
				• Recordable area displayed for motion	recorded.
	Enables verification of			pictures should be interpreted as a
				Guideline.
	the recordable area for			• When using Extra Optical Zoom, the
	a motion picture before			recordable area may not always be
				displayed for certain zoom ratios.
	recording.
				• This setting cannot be used with Intelligent
				Auto Mode.
	[ECONOMY]			[SLEEP MODE]
Turn off the power or				[OFF]/[2 MIN.]/[5 MIN.]/[10 MIN.]:
make the LCD monitor				Automatically shut off power while not in use.
go dark while not using				• To restore → Press the shutter button halfway, or turn on
the camera to minimize				the power again.
battery consumption.				• Cannot be used in the following cases:
				When using AC adaptor (optional) and DC coupler
				(optional), when connected to computer/printer, during
				motion picture recording/playback, during Slide Shows,
				during automatic demo playback

•Settings fixed to [5 MIN.] in [INTELLIGENT AUTO] Mode or [CLIPBOARD] Mode, or [10 MIN.] while Slide Show is paused.

[LCD POWER SAVE] [OFF]/[ON]:

The LCD monitor goes dark to minimize power consumption.

•Reduces the picture quality of the LCD monitor display during recording to minimize battery consumption (except for the Digital Zoom area). Note, however, that there is no effect on the recorded picture.

•When [LCD MODE] is set, the brightness of the LCD monitor follows the setting in [LCD MODE], but the picture quality of the LCD monitor stays at a low level.

24 VQT2R48
	[REC AREA] is not available in the DMC-TZ8/DMC-ZS5.