Panasonic DMC-TZ10 Print SET, Select Single or Multi Select picture, Set number of pictures

Using the [PLAYBACK] menu (Continued)

Playback Mode: (Set mode dial to any except )

[PRINT SET]

Picture/picture no./date printing settings can be made for when printing with DPOF print- compatible shops or printers. (Ask at shop to check compatibility)

Set-up: Press [MENU/SET]→ [PLAYBACK] menu → Select [PRINT SET]

Select [SINGLE] or [MULTI]

Select picture

●[SINGLE] ●[MULTI]

Set number of pictures

(repeat steps and	when using [MULTI] (up to 999 pictures))
●[SINGLE]	●[MULTI]
	No. to print
	Date print
	set

No. to print

Date print set

•Date print setting/release → Press [DISPLAY] button.

•After confirmation, press to return to the menu screen.

■To clear all

Select [CANCEL] in step and select [YES].

●When using PictBridge-compatible printers, check settings on actual printer as these may take priority over camera settings.

●To print from built-in memory at a shop, first copy pictures to card (→137) before making settings. ●Cannot be set for files that are not compliant with the DCF standard (→44).

●Some DPOF information set by other equipment cannot be used. In such cases, delete all of the DPOF information and then set it again with this camera.

●Date printing settings cannot be made for pictures with a [TEXT STAMP] applied. These settings will also be cancelled if a [TEXT STAMP] is applied later.

●Motion pictures recorded in [AVCHD Lite] format cannot be set.

134 VQT2R48