AT&T ATTTL92273 user manual Make, answer or end a cell call, To make a cell call

Telephone operation

Telephone operation

Make, answer or end a cell call

The TL92273/TL92373/TL92473 can be used to make or answer calls on

the cell line. You can connect a maximum of 2 Bluetooth enabled cell phones to the telephone base. Both cell phones can be used on cell calls at the same time.

To make a cell call:

Press CELL 1 or

-OR-

CELL 2. Enter the telephone number, then press DIAL .

Enter the telephone number, then press CELL 1 or CELL 2.

To answer a cell call:

Press HOME/FLASH, /SPEAKER, CELL 1, (0-9 or TONE ).

To end a cell call:

CELL 2 or any dialing key

Press OFF/CANCEL, or put the handset in the telephone base or charger.

NOTES:

•You can also use your cell phone to answer the call. If you answer with your cell phone, it disconnects from the telephone base.

•If you do not want to answer the call, press REJECT.

•When you try to make a cell call but your cell phone is not connected to the base, the telephone base displays Cellular phone not connected. Please connect to proceed. Refer to Bluetooth connection from idle mode on page 20 and Connect/disconnect an active device on page 21.

42