AT&T ATTTL92273 user manual Handset registration is unsuccessful

Appendix

Troubleshooting

The handset registration is unsuccessful.

Follow the steps below to register the handset again.

1.Make sure the handset is out of the telephone base or charger and shows To register, see user manual before you begin registration.

2.Place the handset you wish to register on the telephone base cradle. The handset displays Registering... Please wait on the handset and the red IN USE light on the telephone base turns on. It takes about 90 seconds to complete the registration process. The handset displays HANDSET X Registered (X represents the registered handset number). The IN USE light turns off and the handset beeps when registration is completed.

Refer to the Adding and registering handsets/headsets section on page 95 for details.

Out of range OR Base no power appears on my cordless handset.

•Ensure that the telephone base is powered up.

•Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to synchronize.

•Move the cordless handset closer to the telephone base. You might have moved out of range.

•Reset the telephone base. Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.

•Other electronic products such as HAM radios and other DECT phones can cause interference to your cordless telephone. Try installing your telephone as far away as possible from these types of electronic devices.

110