AT&T ATTTL92273 user manual Replace an active device, To replace an active device

Bluetooth

Bluetooth setup

Replace an active device

If you already have two active devices on the device list and you want to activate a different device, you must deactivate one of the two active devices.

To replace an active device:

1.Press MENU on the handset when it is not in use.

2.Press CID or DIR to highlight Bluetooth, then press SELECT.

3.	Press	CID or			DIR to highlight Device list, then
	press			.
		SELECT
4.	Press	CID or			DIR to highlight the device you want to
	activate without a prefix D1: or D2:, then press						.
						OPTION
5.	Press	CID or			DIR to highlight Connect, then press
			. The handset displays Only BT devices in slot 1 or
	SELECT
	2 can be ready for connection and then a list of devices
	for deactivation.
6.	Press		CID or		DIR to highlight the device to be

deactivated, then press NEXT. The handset displays Cell Phone A is deactivated and you hear a confirmation tone. The screen then displays Connecting Cell Phone B to the base...

7.Depending on your cell phone settings, you may need to press a key on your cell phone to confirm the connection. When the new device is successfully activated and connected, the handset displays Device connected. You hear a confirmation tone.

NOTE: When connecting a Bluetooth device to the device list, all connected devices will be temporarily disconnected until the procedure is complete. It may take up to 2 minutes to reconnect.

BLUETOOTH Add device Device list

Download dir

BACK SELECT

1 DEVICE LIST

D1:Cell Phone A D2:Headset A Cell Phone B

BACK OPTION

1

DEACTIVATE

D1:Cell Phone A D2:Headset A

BACK NEXT

Connecting

Cell Phone B

to the base...

1

DEVICE LIST

D1:Cell Phone B

D2:Headset A

Cell Phone A

BACK SELECT

1

HANDSET 1

--:-- --/--

CONNECT MENU

23