AT&T ATTTL92273 user manual Charge light is off, My caller ID isn’t working

Appendix

Troubleshooting

The charge light is off.

•Make sure the power and line cords are plugged in correctly and securely.

•Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the handset and telephone base to reset.

•Clean the handset and telephone base charging contacts each month using a pencil eraser or cloth.

My caller ID isn’t working.

•Caller ID is a subscription service. You must subscribe to this service from your telephone service provider for this feature to work on your phone.

•The caller must be calling from an area that supports caller ID.

•Both your and your caller’s telephone service providers must use caller ID compatible equipment.

•If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone lines, you must install a DSL filter between the telephone line cord and the telephone wall jack (see page 6). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.

System does not receive caller ID when on a call.

•Make sure you subscribe to caller ID with call waiting features provided by your telephone service provider. Caller ID features work only if both you and the caller are in areas offering caller ID service, and if both telephone companies use compatible equipment.

An icon and New voicemail show on the display and I don’t know why.

•Your telephone has voicemail indication that is separate from the built-in answering system. If appears on the display, then your telephone has received a signal from your telephone service provider that you have a voicemail message waiting for you to retrieve from your telephone service provider. Contact your telephone service provider for more information on how to access your voicemail.

115