AT&T ATTTL92273 To record a new outgoing announcement, To reset your outgoing announcement

Answering system

Answering system settings

To record a new outgoing announcement:

1.

Press

in idle mode.

MENU

2.

Press CID or DIR to scroll to Answering sys, then press

Recording

SELECT

.

announcement...

again to select Announcement.

3.

Press

SELECT

STOP

4.

Press

SELECT

to select Record annc. The system

announces, “Record after the tone. Press STOP when you

are done.”

Playing

5.

After the tone, speak towards the microphone of the

announcement...

cordless handset. Press

to end recording.

STOP

RECORD STOP

6.The newly recorded announcement automatically plays.

Press STOP to stop the playback at any time, or RECORD to record again if desired.

To listen to the recorded announcement again, wait after playback is completed, then scroll to Play annc and press SELECT.

NOTES:

•Your announcement can be up to 90 seconds in length.

•Announcements shorter than two seconds are not recorded.

To reset your outgoing announcement

1.	Press	MENU	in idle mode.
2.	Press	CID or DIR to scroll to Answering sys, then press								.
								SELECT
3.	Press			again to select Announcement.
		SELECT
4.	Press	CID or DIR to scroll to Reset annc and press							. The screen
							SELECT
	prompts Reset to default annc? Press					to confirm. The system
					YES
	announces, “Announcement deleted.” and the screen shows Annc. reset to
	default before returning to the previous menu.
	-OR-
	Press	CID or DIR to scroll to Play annc and play the announcement.

While the announcement is playing, press MUTE/DELETE to reset the announcement. The system announces “Announcement deleted” and the screen shows Annc. Deleted before returning to the previous menu.

When your announcement is reset, the system answers calls with the default announcement described above. You cannot delete the default announcement.

78