Apex Digital HT-180 manual AM/FM Tuner Settings, Storing Channels in Memory

Customizing the Function Settings

AM/FM Tuner Settings

1.Connect the supplied FM & AM Antennas.

2.To access the radio tuner press FUNCTION button.(Each press will access in order:DVD Tuner Analog InDVD) 3.To change FM or AM band, press FM/AM button on remote control while in Tuner Mode.

4.To enter a station frequency directly, use number button. Example: 94.7MHz-press 947(in FM mode), 1220KHz-press 1220(in AM mode), then press ENTER. If unwanted, press CLEAR button.

Storing Channels in Memory

Read thoroughly before attempting to store any radio stations. HT-180 stores 40 FM and 20 AM stations.

1.Press GOTO from the remote control. The tuner will auto- matically search and store all local stations with good signal strength.

2.Press TUNING+ or TUNING- button to scan back or forward to a desired radio station with good signal strength. To manual scan in increments or decreases press the TUNING + or TUNING - on the remote control for 1-2 secends.

3.Press PRESET + or PRESET - to select stored frequencies in sequential order.

4.To number your stored stations,press SETUP,input the sta- tion number,then press SETUP again.

FUNCTION

ENTER

	TUNING +
PRESET -	TUNING -
	FM/AM
PRESET +

NOTICE

The default setting status of the HT-180 is DVD playback.

38 A P E X D I G I T A L H T - 1 8 0