Apex Digital HT-180 Connecting the TV, unit, RF Modulator, and Cable or Satellite Box, Connection

Connecting to a TV using an RF Modulator Continued

Connection 2

Connecting the TV, unit, RF Modulator	Figure 2
and Cable or Satellite Box

1)Connect the three-terminal composite video cable to the back of your Apex Home Theater System . This cable has three prongs, one each in yellow, red, and white. The yellow prong will go into the jack labeled “Video Out”; the white prong will go into the jack labeled “AUDIO L OUT”; the red prong will go into the jack labeled “AUDIO R OUT”.

2)Connect the opposite end of the composite video cable into the back of the RF modulator. Make sure to match up the colors correctly.

3)Connect a coaxial cable from the “Antenna Out” jack on the back of your Satellite receiver to the “Antenna” jack on the RF modulator. The coaxial cable is the one-wire, metal-ended type that you screw onto the Cable or Satellite Box.

4)Connect a coaxial cable from the “To TV” jack on the RF modulator to the jack on the back of your TV.

5)Make sure your TV is set to the appropriate channel before using your Home Theater System . In most cases, this is channel 3 or 4.

Connection 3

Connecting the TV , unit, VCR,	Figure 3
RF Modulator and Cable or Satellite Box

1)Connect the three-terminal composite video cable to the back of your Apex Home Theater System . This cable has three prongs, one each in yellow, red, and white. The yellow prong will go into the jack labeled “Video Out”; the white prong will go into the jack labeled “AUDIO L OUT”; the red prong will go into the jack labeled “AUDIO R OUT”.

2)Connect the opposite end of the composite video cable into the back of the RF modulator. Make sure to match up the colors correctly.

3)Connect a coaxial cable from the “OUT” jack on the back of your satellite receiver to the “IN” jack on the back of your VCR. The coaxial cable is the one-wire, metal-ended type that you screw onto the VCR.

4)Connect a coaxial cable from the “OUT” jack on the back of your VCR to the “Antenna” jack on the RF modulator.

14 A P E X D I G I T A L

5)Connect a coaxial cable from the “To TV” jack on the RF modulator to the jack on the back of your TV.

6)Make sure your TV is set to the appropriate channel before using your Home Theater System . In most

cases, this is channel 3 or 4. Also make sure that the VCR is set to the appropriate channel, as well. This selector is usually on the back of your VCR. Consult your VCR manual for further informa- tion.

H T - 1 8 0