Speaker System Hookup
Connect the supplied speaker system using the supplied speaker cords by matching the polarities and colours of the terminals.
NOTE: Please refer to “Setup Menu” for parameter setup.
HOW TO CONNECT?
Your speaker connection is made easy by matching the color coded speaker terminal to the color coded terminals on the back of the
•Connect front speaker with SPEAKER FRONT R and SPEAKER FRONT L.
•Connect rear speaker with SPEAKER REAR R and SPEAKER REAR L.
•Connect center speaker to SPEAKER CENTER.
•Connect subwoofer to SPEAKER WOOFER.
Front speaker (R) | Center speaker Front speaker (L) | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rear speaker (R) | Subwoofer Rear speaker (L) |
SPECIFYING THE SPEAKER PARAMETERS
To obtain the best possible surround sound, first specify the distance of the speakers from your listening position, then set the balance and level. Use the test tone to adjust the speaker volumes to the same level.When you test the speakers with “TEST TONE”, subwoofer will not respond.
You may adjust the speaker parameters using Speaker Setup in the setup menu.
NOTES:
• Depending on the settings of other speakers, the subwoofer may output excessive sound.
• If the distances of the speakers are not equal, adjust the speaker with shortest distance to the listener.
• According to the speakers, you may set delay value of the speaker via the “Speaker Setup”.
Notice for Speakers:
•Do not connect audio outputs of the same speaker or those between the speakers, that may cause short circuit.
•The examples of bad conditions of the speaker cord: Exposed end speaker cord is touching another speaker terminal; exposed end cords are touching each other due to sloppy removal of insulation.
•After connecting all the equipments, speakers and AC power cord (mains lead), output a test tone to check that all the speakers are connected correctly.
2.Please make sure the connections between speakers and the equipment are correct.
3.If you use front speakers with maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.
H T - 1 8 0 | A P E X D I G I T A L | 15 |
