Woods Equipment PB720-2 manual Cleaning, After Each Use, Periodically or Before Extended Storage

Page 17

CLEANING

After Each Use

Remove large debris such as clumps of dirt, grass, crop residue, etc. from machine.

Inspect machine and replace worn or damaged parts.

Replace any safety decals that are missing or not readable.

Periodically or Before Extended Storage

Clean large debris such as clumps of dirt, grass, crop residue, etc. from machine.

Remove the remainder using a low-pressure water spray.

1.Be careful when spraying near scratched or torn safety decals or near edges of decals as water spray can peel decal off surface.

2.Be careful when spraying near chipped or scratched paint as water spray can lift paint.

3.If a pressure washer is used, follow the advice of the pressure washer manufacturer.

Inspect machine and replace worn or damaged parts.

Sand down scratches and the edges of areas of missing paint and coat with Woods spray paint of matching color (purchase from your Woods dealer).

Replace any safety decals that are missing or not readable (supplied free by your Woods dealer). See Safety Decals section for location drawing.

™

MAN0661 (8/10/2007)

Owner Service 17

 

 

Image 17
Contents PICK-UP Broom To the Dealer IntroductionLEA EL Instructivo Table of ContentsGeneral Information SpecificationsPICK-UP Brooms PB600-2 PB720-2Safety Rules SafetyInstallation TrainingOperation Storage MaintenanceSafety & Instructional Decals Falling OFF can Result in Being RUN Over Be CarefulAttach Broom to Skid Steer OperationOperation Check Brush Pattern AdjustmentAdjust Flaps and Plate Shield Adjust Brush HeightSweeping Operating tipsGutter Brush Optional TransportingDumping Loads Replace the Gutter Brush Adjust Gutter Brush HeightAdjust Gutter Brush Swing PRE-OPERATION Check List Remove Broom from Skid SteerOwner Service Owner ServiceMaintenance Procedure Daily HoursPeriodically or Before Extended Storage CleaningAfter Each Use Troubleshooting TroubleshootingTroubleshooting Dealer Service Dealer ServiceInstall New Sections Replace Brush SectionsAssemble Unit Dealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListAssembly Instructions AssemblyInstall Gutter Brush Optional Install Hydraulic HosesRight Gutter Brush Installation Parts PB600-2 & PB720-2 PICK-UP Broom AssemblyPart QTY Description Core AssemblyMotor Assembly Hood Assembly Hopper Assembly Gutter Brush Assembly Optional Gutter Brush Assembly Parts List Optional Quick Coupler Kits Quick CouplerQuick Coupler KIT Components QC Kit DescriptionQuick Coupler Set Torque Fitting Torque ChartAppendix Metric Series Torque Chart Bolt Torque ChartSAE Series Torque Chart Abbreviations Bolt Size ChartWarranty Rev /23/2005 MAN0661