Windsor MPRO GB 10080410, MPRO AU 10080420, MPRO 10080390, MPRO EU 10080400 manual Maintenance

Page 18

MAINTENANCE

TROUBLESHOOTING CHART

	Worn brush bearings	Squealing or grinding sound in brush	Replace bearings.
	Worn brush bearings	housing.	Replace bearings.
		housing.
			Make several passes at right angles to
	Carpet not getting clean	Severe soil conditions	each other.
			Use a pre-spray.
	Carpet too wet	Worn spray jet	Replace spray jet which is producing a
	Carpet too wet	Worn spray jet	fine mist.
			fine mist.
		Solution filter screen clogged.	Clean solution filter screen located
		Solution filter screen clogged.	inside lower tank.
			inside lower tank.
			Clean or replace jet. Do not use a wire
	Carpet not getting wet	Spray jet clogged.	to clean jet. Damaged jet will cause
	Carpet not getting wet		over-saturation.
			over-saturation.
		Pump not running.	Check for and correct any loose wires.
		Pump not running.	Repair or replace.
			Repair or replace.
		Faulty solution switch.	Replace switch in handle.

4-6	86037780 EXTRACTOR 12/09/06

Image 18

Contents Mini Carpet Extractor 4 Gallon Machine Data LOG/OVERVIEW OverviewTable of Contents HOW to USE this Manual Safety Read ALL Instructions Before Using this MachineFor Safety Hazard Intensity LevelGrounding Instructions ElectricalExtension Cords Volt ModelsSafety Label Location Operation InspectionChemicals Main Handle Solution Button Controls & ComponentsOperating Instructions Filling the Solution Tank Special NotesOperating Machine with Accessory Tools Operating the MachinePeriodic Maintenance MaintenanceDAILY/REGULAR Maintenance Protect from FreezingMaintenance Instructions Brush AssemblySpray JET Brush Motor Removal Pump RemovalVacuum Motor Carbon Brushes Replacement Vacuum Motor RemovalTroubleshooting Chart Problem Cause SolutionMaintenance Mini Carpet Extractor Parts List Brush Deck Part PRV no QTY Description Serial no From Control Panel Part PRV QTY Description Serial no From Decal LABEL, Control Panel Frame & Wheels BRKT, Brush HOUSING, 10 Handle Part PRV no QTY Description Solution BOX, Pump Mount Extractor 03/22/07 JET, RT ANG, 1/4 Barb Tank & Dome TANK, SOLUTION, Extractor Vacuum VAC MOTOR, 120V 5.7 3ST W/TUBE 115V only Wiring DIAGRAM-CONTROL Panel Wiring Diagram Control Panel Wiring DIAGRAM-VACUUM, Brush Motor & Pump Wiring Diagram VACUUM, Brush Motor & Pump Ground Micro Screw Switch Conductor Wire ASM, 18GA 4 BLK Dash Line = Pump BOX Outline ASM, Filter EMI Brush Hose Diagram Accessories Spare PartsExtractor 12/09/06