OPERATING INSTRUCTIONS
FILLING THE SOLUTION TANK
1.Release dome clamp.
2.Lift upper recovery tank from machine and set aside.
3.Use a clean bucket, recovery tank or hose to fill solution tank with hot water. The solution tank holds 4 gallons (15.2 liters) of cleaning solution.
4.Add a
NOTE: Periodically operate the extractor with only hot water to remove chemical residue in carpet.
To avoid possible distortion of the polyethylene solution/recovery tanks, DO NOT USE WATER WITH A TEMPERATURE THAT EXCEEDS 140°F (60°C).
5.Place recovery tank back on machine.
6.Place dome on recovery tank. Make sure dome is seated correctly to ensure proper vacuum seal. Clamp dome securely to recovery tank.
Use only the suitable chemicals listed in the Chemical Section. Using incompatible chemicals will damage the machine. Carefully read ingredients on manufacturer’s label before using any product in this machine.
OPERATION
SPECIAL NOTES:
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
The sound pressure level at the operator’s ear was measured to be 73.7 dBA. This was a nearfield,
The weighted root mean square acceleration at the operator’s arms was measured to be below 2.5m/s2. This was a
86037780 EXTRACTOR 05/09/08 |