Windsor cdt7 10080220 manual Operations, Intermittent Continuous

OPERATIONS

Tip machine back by main handle to move to starting point.

Lower machine to floor.

Select intermittent or continuous switch setting to turn on brush and start solution spray.

The intermittent setting requires the operator to hold the switch in the “on” position with the thumb, and is typically used in small areas where short cleaning passes are made.

The continuous setting allows the operator to set the switch in the “on” position with one touch, and is typically used in large areas where long cleaning passes are made.

STEP

5

STEP

6

STEP

7

INTERMITTENT

CONTINUOUS

3-7 CADET 86038220 03/16/07