Windsor cdt7 10080220 manual Safety Instructions, Read All Instructions Before Using This Machine

Page 5
SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precaution must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

This machine is for commercial use.

!WARNING:

To reduce the risk of fire, electric shock, or injury:

Connect to a properly grounded outlet. See Grounding Instructions.

Do not leave the machine unattended. Unplug machine from outlet when not in use and before maintenance or service.

Use only indoors. Do not use outdoors or expose to rain.

Do not allow machine to be used as a toy. Close attention is necessary when used by or near children. Use only as described in this manual. Use only manufacturer’s recommended components and attachments.

Do not use damaged electrical cord or plug. Follow all instructions in this manual concerning grounding the machine. If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return it to an authorized service center.

Do not pull or carry machine by electrical cord, use as a handle, close a door on cord, or pull cord around sharp edges or corners.

Do not run machine over cord. Keep cord away from heated surfaces.

Do not unplug machine by pulling on cord. To unplug, grasp the electrical plug, not the electrical cord. Do not handle the electrical plug or machine with wet hands.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow. This machine is intended for cleaning carpet only.

Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes. This machine is not suitable for picking up health endangering dust.

Turn off all controls before unplugging.

Machine can cause a fire when operating near flammable vapors or materials. Do not operate this machine near flammable fluids, dust or vapors.

This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices for more than normal housekeeping purposes.

Maintenance and repairs must be done by qualified personnel.

If foam or liquid comes out of machine, switch off immediately.

SAVE THESE INSTRUCTIONS

CADET 86038220 03/16/07

2-1

Image 5
Contents MODEL CDT7 Operating InstructionsCARPET EXTRACTOR Read these instructions before operating the machineYOUR DEALER MACHINE DATA LOG/OVERVIEWMODEL PUBLISHEDHOW TO USE THIS MANUAL TABLE OF CONTENTSSAFETY MAINTENANCEMODEL HOW TO USE THIS MANUALREAD ALL INSTRUCTIONS BEFORE USING THIS MACHINE SAFETY INSTRUCTIONSThis machine is for commercial use To reduce the risk of fire, electric shock, or injuryHAZARD INTENSITY LEVEL HAZARD INTENSITY LEVELFOR SAFETY WHEN SERVICING MACHINEGROUNDING INSTRUCTIONS GROUNDING INSTRUCTIONSELECTRICAL POWER TYPE TECHNICAL SPECIFICATIONSGENERAL DIMENSIONS/WEIGHT SOLUTION CAPACITY 7 gallons 26.5ltrCONTROLS/COMPONENT LOCATIONS 6. Recovery Tank Dome 4. Clean-Out Opening 5. Pour Spout 6. Lift Handle 1. Solution Intake Cover 2. Vacuum Intake Cover 3. Float Shut-OffCHEMICALS FILLING OPERATIONSCADET 86038220 03/16/07 INCORRECT OPERATIONSCORRECT INTERMITTENT CONTINUOUS CLEANING PROCEDURE OFFOFF OFF PUMPVACUUM ONON OFF ACCESSORY TOOL USAGE3-10 MAINTENANCE MAINTENANCE SERVICE SCHEDULEDAILY WEEKLYDAILY / REGULAR MAINTENANCE MAINTENANCEPERIODIC MAINTENANCE Vacuum Motor Carbon Brushes Replacement Ametek Vacuum Motor Carbon Brushes Replacement WindsorWARNING The green WARNING The greenTO PERFORM THE FOLLOWING REPAIRS BELT REPLACEMENT ONLY QUALIFIED WARNING MAINTENANCE PERSONNEL ARESOLUTION PUMP REPLACEMENT 86268450 WIRING DIAGRAM86268830 86266890 PRV NO 86004480 PRV NOPROBLEM TROUBLESHOOTING CHARTSOLUTION CAUSETHIS PAGE INTENTIONALLY LEFT BLANK A B FRAME ASSEMBLYSEE SOLUTION TANK FRAME ASSEMBLY 4445 BRUSH ASSEMBLY1743 3741BRUSH ASSEMBLY C SEE SOLUTION 5 TANK PUMP ASSEMBLYPRIOR TO SERIAL NO 1120 2625PUMP ASSEMBLY SEE SOLUTION TANK 2427 FROM SERIAL NOPUMP ASSEMBLY VACUUM SHOE ASSEMBLY 5-10 5-11 CONTROL PANEL ASSEMBLYSEE SOLUTION TANK 5-12 5-13 SOLUTION TANK ASSEMBLYPANEL SEE FRAME5-14 5-15 RECOVERY TANK ASSEMBLY10A 1A 14A 5-16 5-17 SUGGESTED SPARE PARTS