Multiple Transmitter Selection
1.Verify that the power is removed from Transmitter 1. Press Transmitter No. key on the remote control and point it at Receiver 1.
OSD Displays:
Select Transmitter Number:
→GWHDMS52
→GWHDMS52
SETUP
Up to 4 transmitters may be detected. Press up / down and OK button on remote control for selection.
2. Enter SETUP menu. OSD Displays:
SETUP:
→Add New Transmitter
→Remove Transmitter
→Modify Transmitter Name
Return
3.Enter “Add New Transmitter” menu if you would like to add a Transmitter. OSD Displays:
| Press transmitter no. key to escape | |
SEARCHING | ||
SEARCHING | ||
| ||
|
|
During this period, press and hold the power down on Transmitter 2, and plug in power. Hold the power button down until the Power LED on Transmitter 2 start to blink orange which indicates that the Transmitter 2 has entered the “connecting” mode. After the receiver has found the new transmitter, the OSD Displays.
Select New Transmitter
→GWHDMS52
Return
24