Yeoman YM-W9122FL, YM-W9121FL manual ASH Removal Burning Solid Fuel With Multifuel KIT Fitted

Page 6

OPERATING INSTRUCTIONS

4.9Do not re-fuel the stove above the level of the log guards.

4.10The ideal control settings to suit the particular installation and personal preferences will be established by experience in using the stove.

4.11It is not recommended to load large amounts of logs and burn with the Airwash controls on low settings for long periods of time. This will reduce the effectiveness of the glass cleaning effect of the airwash. Also this will cause a large build-up of tars and creosotes in the stove and flue system.

4.12We would recommend that the stove be burnt at high output for at least 30 minutes each day when it is in use. This will help reduce the build-up of tars and creosotes within the stove and flue system.

Do not burn painted, impregnated wood, pallet wood or manufactured board products.

5.10The ideal control settings to suit the particular installation and personal preferences will be established by experience in using the stove. It is not recommended to load large amounts of fuel and burn with the Primary Air Control on low settings for long periods of time as this will reduce the effectiveness of the glass cleaning effect of the airwash. Also, this will cause a large build-up of tars and creosotes on the appliance and flue system.

5.11We would recommend that the stove be burnt at high output for at least 30 minutes each day when it is in use. This will help reduce the build-up of tars and creosotes within the stove and flue system.

Do not burn bituminous coal, ‘petro-coke’ or other petroleum based fuels, as this will invalidate any product guarantee.

6.ASH REMOVAL

 

5. BURNING SOLID FUEL

 

(WITH MULTIFUEL KIT FITTED)

5.1

Open the Airwash controsl to approximately 50% and

 

open the Primary air control fully.

5.2

Place some pieces of firelighter or dry crumpled paper on

 

the grate and cover with some small pieces of dry kindling

 

wood. Light the paper or firelighters.

5.3

To avoid the build-up of condensation on the door glass it is

 

advisable to leave one door slightly open as the fire

 

establishes, and the glass warms.

5.4

As the fire becomes established add pieces of solid fuel and

1

PR7562

2

PR7563

 

fully close the door. Do not initially add too much fuel as

 

this may smother the fire. Do not leave the stove with the

 

door slightly open as this could over-fire the stove and

 

cause permanent damage.

5.5

As the fire becomes established reduce the Airwash

 

controls to approximately 25% and control the burn rate

 

using the Primary air control only.

5.6

To burn solid fuel efficiently it is best to control the

 

combustion using the Primary air control only.

5.7

Before re-fuelling the stove it is advisable to first de-ash the

 

firebed.

5.8

Open the Primary air control fully for a few minutes, to

 

establish a glowing bed before adding new fuel. Allow the

 

new fuel to burn at high output for a few minutes before

 

adjusting the burn rate with the Primary air control to the

 

desired setting. It is best to refuel little and often to maintain

 

clean and efficient burning.

5.9

Do not re-fuel the stove above the level of the log guards.

6.1The burning of any fuel will produce ash, which will have to be removed after a period of use. This time will depend on the fuel used. Before removing the ash from the stove it is advisable to let the fire burn down to a low level, or even go out completely. If a multifuel kit is fitted the ashpans can be removed from the stove using the tool provided (see diag. 2), after opening the door and removing drop-in front plate (see diag. 1).

6.2As heat can remain in the ash for a long period after use, care must be taken when removing and carrying the full ashpan. We suggest that the ashpan be carried using gloved hands, or the ash is placed directly into an Ash Caddy (Part No. 4227).

6.3When burning wood the amount of ash will be smaller and may only need removal once every week. To do this, allow the fire to burn out and cool. Then after removing the log retainer, scoop out the ash with a suitable shovel. It is best to leave a layer of ash in the stove to form a bed for the new fire.

6.4Do not place ash in a bin made from plastic or any other combustible material.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Exe/Devon/County Double FOR YOUR RECORDS Service Records Serial Number Operating InstructionsGeneral AIR ControlsUsing the Stove for the First Time Recommended FuelsBurning Wood Open the Primary air control fully Using the Primary air control onlyASH Removal Burning Solid Fuel With Multifuel KIT Fitted Door slightly open as this could over-fire the stoveOver Firing Burning PerformanceTroubleshooting Seasonal USEAnnual Service General CleaningCleaning Glass Do not use abrasive cleaner or cleaning padsRemoval of the LOG Guard Fitting and Removal OF BAFFLESTask Product Name Fitting A NEW Glass Door Care of Your Stove Fitting a NEW Door SealProduct Description For Devon/County Single double For Devon Single double Basic Spare Parts ListDiagram Description For County Single doubleYM-YM00545 For EXE/devon Double double For EXE Double doubleFor Devon Double double YM-YM81080For County Double double YM-YM05080YM-YM44081 For exe 1 door For exe/devon/county 1 doorCommon parts For exe/Devon/county Door For Devon 1 doorFor Devon 2 door For exe/devon/county 2 doorFor exe 2 door For County 2 doorPage

YM-W9122FL, YM-W9121FL specifications

The Yeoman YM-W9122FL and YM-W9121FL are remarkable additions to the world of high-performance electric bikes, designed for both urban commuting and adventurous rides. These models are engineered with cutting-edge technologies and innovative features that set them apart in the ever-growing electric bike market.

Starting with the YM-W9122FL, it boasts a robust 750W brushless motor that ensures a powerful and efficient ride. This motor provides the capacity to reach speeds up to 30 mph, making it an excellent choice for those who value speed and performance. The bike is equipped with a high-capacity lithium-ion battery, offering an impressive range of up to 60 miles on a single charge. This extended range allows riders to venture further without the constant worry of battery depletion.

The frame of the YM-W9122FL is crafted from aerospace-grade aluminum, providing a lightweight yet durable construction. This makes the bike agile and easy to handle, while also ensuring it can withstand the rigors of outdoor adventures. The suspension system features a front fork that absorbs shocks and enhances stability, making it suitable for both city streets and rough terrains. Additionally, the bike is equipped with high-quality disc brakes that offer superior stopping power, ensuring safety during fast descents or sudden stops.

On the other hand, the YM-W9121FL presents a slightly different design, catering to riders who prefer a more urban aesthetic without compromising on performance. It maintains a similar powertrain with a 750W motor and a comparable lithium-ion battery, ensuring a strong performance and extended range. The bike features a step-through frame, making it easier for riders to mount and dismount, which is particularly beneficial for those who may struggle with traditional bike frames.

Both models come with integrated LED headlights and taillights for enhanced visibility during night rides, along with a smart LCD display that provides essential information such as speed, distance traveled, battery level, and riding mode. The e-bike's multiple assist levels allow riders to choose how much help they want from the motor, offering a customizable riding experience.

In summary, the Yeoman YM-W9122FL and YM-W9121FL are designed to cater to different riding preferences, both ensuring superior performance, extended range, and advanced safety features. As electric bikes continue to evolve, these models exemplify the seamless blend of power, practicality, and cutting-edge design in modern cycling technology. Whether for commuting or leisure, they represent a significant step forward in electric mobility solutions.
Top Page Image Contents