Panasonic DMW-FL360L Using the Wide Panel, Using the Catch Light Plate, Other Settings

Fixing the Irradiation Angle

Point the flash head at a wall or ceiling for bounce flash photography. The area illuminated at ranges of 0.5 m

(1.6 feet) to 1.0 m (3.3 feet) will not be correct; point the 180º flash down.

90º

7º

Pressing the bounce unlock button, turn the	180º
light-emitting section up/down and left/right.

Using the Wide Panel

Use the built-in wide panel for flash photography when the focal length of the lens is wider than 12 mm.

Slide out the wide panel and place it on the flash head.

≥The estimated range display changes when the wide panel

is used.

≥ The lighting angle can be set to 10 mm and 8 mm only.

≥Do not tilt the wide panel up.

≥The ZOOM display will blink if the lens has a focal length of 12 mm or more.

Using the Catch Light Plate

Reflecting the flash light allows you to shoot with the catch light effect, which reflects light in the models eyes.

Slide out the catch light plate.

Point the flash directly upward with the plate toward the subject.

Other Settings

The following options can be selected in the control panel.

1 Press the [OK] button.

An item will blink in the control panel.

2 Press 3/4/2/1 to highlight items. 3 Rotate the dial to select the setting,

and then press [OK] button.

(ENG) VQT4Q07 13