Wireless Flash Settings
Wireless control is available with Panasonic digital cameras that support wireless mode. See the operating instructions of the digital camera for operation of the digital camera during wireless flash shooting.
1 Set the camera to wireless mode.
2 Set the flash to [RC] mode.
“Flash Mode” (P10)
•When [RC] is selected, pressing [MODE] (3) button
allows you to set a channel. Press the [MODE] (3) button again to turn back.
3 Use the flash to select the channel and group.
“Other Settings” (P13)
Set the camera and flash to the same channel.
Channel
| The camera can adjust flash settings separately for up to 3 |
Group | groups; choose the group to which the flash belongs. |
The Firing mode, the flash adjustment, and the manual flash adjustment can be set for each group by operating the camera.
Placing Wireless Flash Units
Since the communication is performed with the flash emission of the camera, the flash positioning range varies with the camera. Refer to the camera operating instructions for details about the flash positioning range.
1 Attach the supplied stand. |
|
• Slide the lock lever in the direction opposite to that | |
indicated by the [LOCK 1] icon (1) and slide the flash |
|
onto the stand until it clicks securely into place (2). |
|
• Slide the lock lever to the [LOCK 1] position to latch the |
|
flash in place. |
|
•To remove the flash, slide the latch in the direction opposite to the [LOCK 1] arrow and slide it from the stand.
2Position the flash with the wireless sensor (A) facing the camera.
Take a test shot after positioning.
≥We recommend using a single group of up to three remote flash units.
≥Flash may not fire due to the angle or distance between the camera and the object.
