∫MANUAL
Choose the guide number.
1 Set the flash mode to [MANUAL].
“Flash Mode” (P10)
2 Match the zoom position to the focal length of the lens.
“[ZOOM]” (P11)
3 Set the guide number.
“Other Settings” (P13)
Slave Mode
The flash can be fired remotely in sync with any flash fired by other units.
1 Set the flash mode to [SL AUTO] or [SL MANUAL].
“Flash Mode” (P10)
Adjust other flash settings as for [AUTO] or [MANUAL] mode. “Camera without Communication Functions” (P15)
2 Position the flash.
Flash positioning method is same as the wireless mode. “Placing Wireless Flash Units” (P12)
Refer to the camera operating instructions for details about the flash positioning range.
• Set the flash mode of the camera to the manual which does not fire the
•The flash may fire in response to flash units used by other photographers.
Cautions for Use
∫About the unit
Do not carry the unit when it is still attached to the camera body.
∫About the batteries
Be sure to remove the batteries when you will not be using the unit for a long period of time.
Specifications
Specifications are subject to change without notice.
Power requirements: DC 6.0 V
16 VQT4Q07 (ENG)