Yeoman PR1145 Site Requirements, Flue and Chimney Requirements, Installation of the gas supply

Page 10

INSTALLATION INSTRUCTIONS

SITE REQUIREMENTS

1.Flue and Chimney Requirements

1.1The chimney or flue system must comply with the rules in force, and must be a minimum of 127mm (5") in diameter.

1.2The minimum effective height of the flue or chimney must be 3 metres (10ft). Any horizontal flue run from the rear outlet should not exceed 100mm from the back of the appliance.

1.3The chimney or flue must be free from any obstruction. Any damper plates should be removed or secured in the fully open position, and no restrictor plates should be fitted.

1.4The chimney should be swept prior to the installation of the appliance. However, where it can be seen that the chimney is clean and unobstructed throughout its entire length, it need not be swept.

1.5If the stove is to be fitted into an existing brick built chimney without a closure plate, a 127mm (5") liner must be used. Larger lined flues may work, but in some instances could cause cold start flue problems resulting in nuisance shutdown. Lined flues above 175mm (7") are not recommended.

1.6Due to recent changes to European chimney standards, new flues and chimneys are now classified by their resistance to temperature, pressure, corrosion, condensation and fire. To assist in identifying the correct flue system, the minimum flue specification is shown in Installation Instructions, Technical Specification (page 8). Existing chimneys are not covered by this system.

2.Ventilation

2.1Consult the rules in force.

Note: This appliance does not normally require any additional ventilation when installed in G.B.

3.Installation of the gas supply

9.1Before installation ensure the stove is compatible with the local gas type and pressure.

9.2Ensure the gas supply delivers the required amount of gas in accordance with the rules in force.

9.3Soft copper tubing and soft soldered joints must be no closer than 50mm to the base of the burner unit.

9.4Ensure a means of isolating the gas supply, independent of the stove's controls is provided.

9.5All gas supply pipes must be purged of any debris before connection to the stove.

4.location

4.1This appliance must stand on a non-combustible hearth that is at least 12mm thick, and projects a minimum of 50mm from the base of the stove in all directions (see Diagram 1).

1

B

 

 

A = 643mm

 

 

B = 43mm

C

A

C = 12mm

 

 

 

 

AR0604

4.2This appliance must not be installed in a room that contains a bath or shower.

4.3The stove is not suitable for installation against a combustible wall; all combustible materials must be removed from the area behind the stove.

4.4Ensure that all minimum clearances to combustible materials are complied with (see Diagrams 2 & 3).

2

150

225

150

AR0522

3

50mm

150mm

AR0531

The above dimensions provide adequate clearance to combustible materials. It may be necessary to add additional clearance so that the controls can be reached and spillage tests performed when necessary.

10

Image 10
Contents Yeoman Exe Midi Contents Pass Fail APPLIANCE COMMISSIONING CHECKLISTFLUE CHECK GAS CHECKUser Instructions GeneralTurning the Stove off Lighting the StoveUpgrading the Stove Cleaning the stove Advice on Handling and Disposal of Fire CeramicsUser Instructionsheading Fuel bed arrangementInstallation Details HOT SurfacesTechnical Specification Installation InstructionsPacking Checklist Flue and Chimney Requirements Installation of the gas supplySITE REQUIREMENTS LocationSafety precautions InstallationControl upgrade Installation of the stoveFuel BED Arrangement For full instructions see User Instructions, Section Commissioning CommissioningServicing Requirements Servicing InstructionsCheck Ignition Functional Check Flame Failure Functional CheckMain burner Replacing PartsGeneral Pilot unitPiezo Ignition lead and piezoGas valve Magnetic safety valve Main injectorPrimary aeration plate Changing between gas types Basic Spares ListSERVICE RECORDS

PR1145 specifications

Yeoman PR1145 is a cutting-edge technology platform designed to streamline the process of building applications and managing web development projects. Built for developers who seek efficiency and flexibility, the PR1145 combines a suite of robust features that enhance productivity while adhering to industry standards.

One of the main features of the Yeoman PR1145 is its powerful scaffolding capabilities. This allows developers to quickly generate project structures and boilerplate code, significantly reducing the time spent on setup. The intuitive workflow of Yeoman helps developers jumpstart their applications with a clear directory structure, along with essential configuration files tailored for various frameworks and libraries.

The Yeoman PR1145 is designed to be highly compatible with modern web technologies. It seamlessly integrates with popular frameworks like React, Angular, and Vue.js, as well as build tools such as Webpack and Gulp. This flexibility ensures that developers can utilize their preferred stacks while harnessing the full potential of Yeoman's features.

Another characteristic that sets the Yeoman PR1145 apart is its rich ecosystem of plugins and generators. Developers can choose from an extensive library of community-contributed generators tailored to specific use cases, whether it be for a simple static site or a complex web application. This modular architecture means that developers can extend the capabilities of Yeoman effortlessly, ensuring that their toolset remains relevant amidst the continually evolving web landscape.

The Yeoman PR1145 supports a robust testing framework, promoting best practices in quality assurance. With built-in support for testing tools like Jest and Mocha, developers can establish comprehensive testing suites, facilitating the development of high-quality, reliable applications. This focus on quality is complemented by its automated deployment options, which optimize the release process and minimize the likelihood of human error.

In terms of performance, Yeoman PR1145 prioritizes speed and responsiveness. Its lightweight core combined with optimized build processes results in fast application performance, enhancing the user experience. Moreover, Yeoman emphasizes code consistency and maintainability, which are critical for collaborative projects.

Overall, Yeoman PR1145 represents a comprehensive solution for modern web development, blending powerful tooling with community-driven resources. Its emphasis on efficiency, flexibility, and integration makes it an essential component on the developer's path to building top-tier applications in today’s digital landscape.