Yeoman PR1145 instruction manual Lighting the Stove, Turning the Stove off, Upgrading the Stove

Page 5

USER INSTRUCTIONS

2.Lighting the STOVE

2.1The control valve is on the right-hand side at the foot of the stove. It has two controls:

The right-hand knob controls the pilot ignition

The left-hand knob controls the main burner

2.2Refer to separate instructions if your stove is upgraded to include battery remote control. The following instructions apply whether or not you have the remote upgrade.

Lighting the Pilot

2.3The left-hand and right-hand control knobs must both point to off ():

2

AR0914

2.4Press in the right-hand control knob and rotate anti-clockwise until a click is heard.

2.5Continue to press in. The knob should point to the pilot (). The pilot should now light.

2.6Keep the knob depressed for 10 seconds before releasing. The pilot should remain lit.

2.7If the pilot does not stay lit repeat the above steps.

NOTE: If the pilot goes out the Interlock system prevents it being lit again for a short period.

2.8If, after repeating the above steps, the pilot does not light, contact your retailer or installer.

Adjusting the Flame height

2.9Turn the right hand control to point to main burner ( ). You can now adjust the flame height and temperature using the left-hand control knob.

2.10Turn the left-hand knob anti-clockwise to increase the flame height.

2.11Turn clockwise to decrease the height.

YELLOW FLAMES APPEAR WHEN THE STOVE HAS REACHED SUFFICIENT HEAT (10 TO 20 MINUTES). IF THE STOVE IS EXTINGUISHED OR GOES OUT DURING USE WAIT 3 MINUTES BEFORE ATTEMPTING TO RELIGHT.

3.turning the Stove off

3.1To turn off main burner turn the left-handknob until it points to off (). The pilot light will remain lit.

3.2To turn off pilot light press in and turn the right-handknob until it points to off (). The pilot light will go out.

4.upgrading THE Stove

The stove is fitted with a control valve that can be upgraded to support a battery powered remote control. Two types of remote control can be obtained through your local Gazco stockist:

4.1The Standard Remote Control (Gazco Part No. 8455) controls the gas stove after the pilot is lit so you can regulate the main burner through its range of settings and turn the burner off leaving just the pilot lit.

4.2The Thermostatic and Timer Remote Control (Gazco Part No. 8456) controls the stove after the pilot is lit using three modes:

Manual Mode – used to turn the burner on and off and regulate it through its range of settings.

Auto Mode – used to turn the burner on and off and regulate the heat to a pre-set temperature.

Timer Mode – used to turn the burner on and off at two pre-set times and regulate the heat to a pre-set temperature during those periods.

5

Image 5
Contents Yeoman Exe Midi Contents FLUE CHECK APPLIANCE COMMISSIONING CHECKLISTPass Fail GAS CHECKGeneral User InstructionsUpgrading the Stove Lighting the StoveTurning the Stove off Advice on Handling and Disposal of Fire Ceramics Cleaning the stoveFuel bed arrangement User InstructionsheadingHOT Surfaces Installation DetailsPacking Checklist Installation InstructionsTechnical Specification SITE REQUIREMENTS Installation of the gas supplyFlue and Chimney Requirements LocationControl upgrade InstallationSafety precautions Installation of the stoveFuel BED Arrangement For full instructions see User Instructions, Section Commissioning CommissioningCheck Servicing InstructionsServicing Requirements Flame Failure Functional Check Ignition Functional CheckGeneral Replacing PartsMain burner Pilot unitGas valve Ignition lead and piezoPiezo Main injector Magnetic safety valvePrimary aeration plate Basic Spares List Changing between gas typesSERVICE RECORDS

PR1145 specifications

Yeoman PR1145 is a cutting-edge technology platform designed to streamline the process of building applications and managing web development projects. Built for developers who seek efficiency and flexibility, the PR1145 combines a suite of robust features that enhance productivity while adhering to industry standards.

One of the main features of the Yeoman PR1145 is its powerful scaffolding capabilities. This allows developers to quickly generate project structures and boilerplate code, significantly reducing the time spent on setup. The intuitive workflow of Yeoman helps developers jumpstart their applications with a clear directory structure, along with essential configuration files tailored for various frameworks and libraries.

The Yeoman PR1145 is designed to be highly compatible with modern web technologies. It seamlessly integrates with popular frameworks like React, Angular, and Vue.js, as well as build tools such as Webpack and Gulp. This flexibility ensures that developers can utilize their preferred stacks while harnessing the full potential of Yeoman's features.

Another characteristic that sets the Yeoman PR1145 apart is its rich ecosystem of plugins and generators. Developers can choose from an extensive library of community-contributed generators tailored to specific use cases, whether it be for a simple static site or a complex web application. This modular architecture means that developers can extend the capabilities of Yeoman effortlessly, ensuring that their toolset remains relevant amidst the continually evolving web landscape.

The Yeoman PR1145 supports a robust testing framework, promoting best practices in quality assurance. With built-in support for testing tools like Jest and Mocha, developers can establish comprehensive testing suites, facilitating the development of high-quality, reliable applications. This focus on quality is complemented by its automated deployment options, which optimize the release process and minimize the likelihood of human error.

In terms of performance, Yeoman PR1145 prioritizes speed and responsiveness. Its lightweight core combined with optimized build processes results in fast application performance, enhancing the user experience. Moreover, Yeoman emphasizes code consistency and maintainability, which are critical for collaborative projects.

Overall, Yeoman PR1145 represents a comprehensive solution for modern web development, blending powerful tooling with community-driven resources. Its emphasis on efficiency, flexibility, and integration makes it an essential component on the developer's path to building top-tier applications in today’s digital landscape.