Servicing Instructions, Servicing Requirements

SERVICING INSTRUCTIONS

SERVICING REQUIREMENTS/ FAULT FINDING CHARTS

1. SERVICING REQUIREMENTS

IMPORTANT – The glass panel on this appliance should be checked for any signs of damage on the front face of the glass panel (scratches, scores, cracks or other surface defects). If damage is observed, the glass panel must be replaced and the appliance must not be used until a replacement is installed. Under no circumstances should the appliance be used if any damage is observed. Please isolate the appliance until a replacement glass panel has been obtained and installed. Replacement glass panels can be purchased from Gazco via the retailer from which the appliance was purchased or any other Gazco distributor.

This appliance must be serviced at least once a year by a competent person. All tests must be serviced by best practice as described by the current Gas Safe recommendations.

1.1Before any test are undertaken on the appliance, conduct a gas soundness test for the property to ensure that there are no gas leaks prior to starting work.

1.2Before any tests are undertaken on the appliance it is also recommended to fully check the operation of the appliance.

1.3Special checks:

—Clean any lint or fluff from the pilot - pay particular attention to the aeration hole in the side of the pilot.

—Clean away any fluff or lint from under the burner.

—Check that the spark gap on the pilot is correct.

1.4Correct any faults found during the initial tests and then re-commission the appliance conducting the usual safety checks.

1.5Advise the customer of any remedial action taken.

15mm	3
	.
	5mm

AR0097

CHECK 1

pilotassembly, clean the area.

Yes

Does the pilot light?	No	Is the control being operated correctly?	Yes	Will the pilot light with a match?	No

gas turned on to the appliance?	Yes	gas pressure correct?

Is the		Is the

Yes		Has the system got any air in it?

No		point,
		point,
		theinlet test filter.

SYSTEM OK

IGNITION FUNCTIONAL

PILOT WILL NOT LIGHT

around the	short the spark,
there is no debris	etc.) which could
Ensure	(e.g. soot,

Yes			No

the valve.	a spark?	Section retry.
Operate	Is there	Consult 2 and

Yes

Check alignment of pilot burner head, change the ignition lead, see Diagram 1 on page 14.

No			No


Check isolation tap and gas meter, retry.

			Correct and retry.

Yes

Purge the gas pipes and retry.

check and pilot

in the system, seating, valve

blockage the mag

There is a

SEE 'NO SPARK' CHART

PR1145 specifications

Yeoman PR1145 is a cutting-edge technology platform designed to streamline the process of building applications and managing web development projects. Built for developers who seek efficiency and flexibility, the PR1145 combines a suite of robust features that enhance productivity while adhering to industry standards.

One of the main features of the Yeoman PR1145 is its powerful scaffolding capabilities. This allows developers to quickly generate project structures and boilerplate code, significantly reducing the time spent on setup. The intuitive workflow of Yeoman helps developers jumpstart their applications with a clear directory structure, along with essential configuration files tailored for various frameworks and libraries.

The Yeoman PR1145 is designed to be highly compatible with modern web technologies. It seamlessly integrates with popular frameworks like React, Angular, and Vue.js, as well as build tools such as Webpack and Gulp. This flexibility ensures that developers can utilize their preferred stacks while harnessing the full potential of Yeoman's features.

Another characteristic that sets the Yeoman PR1145 apart is its rich ecosystem of plugins and generators. Developers can choose from an extensive library of community-contributed generators tailored to specific use cases, whether it be for a simple static site or a complex web application. This modular architecture means that developers can extend the capabilities of Yeoman effortlessly, ensuring that their toolset remains relevant amidst the continually evolving web landscape.

The Yeoman PR1145 supports a robust testing framework, promoting best practices in quality assurance. With built-in support for testing tools like Jest and Mocha, developers can establish comprehensive testing suites, facilitating the development of high-quality, reliable applications. This focus on quality is complemented by its automated deployment options, which optimize the release process and minimize the likelihood of human error.

In terms of performance, Yeoman PR1145 prioritizes speed and responsiveness. Its lightweight core combined with optimized build processes results in fast application performance, enhancing the user experience. Moreover, Yeoman emphasizes code consistency and maintainability, which are critical for collaborative projects.

Overall, Yeoman PR1145 represents a comprehensive solution for modern web development, blending powerful tooling with community-driven resources. Its emphasis on efficiency, flexibility, and integration makes it an essential component on the developer's path to building top-tier applications in today’s digital landscape.