Whynter RPD-702WP IV. Operation Instructions, AIR Filters Installation, Start Operation

Page 7

IV. OPERATION INSTRUCTIONS

AIR FILTERS INSTALLATION

Your Whynter portable dehumidifier is equipped with a removable and washable filter. The filter removes large particles such as dust, pet hair and dander.

WARNING: NEVER OPERATE THE DEHUMIDIFIER WITHOUT THE FILTER

START OPERATION

1.Ensure that the appliance is connected to the power socket

2.Make sure the water bucket is placed in proper position.

3.Make sure filter is installed

4.When the unit is turned on for the first time, if the bucket full lamp lights up, just pull out the water bucket then push it back to the proper position.

5.Set the relative humidity level RH% by press- ing the up and down buttons. We recommend setting the RH% to at least 10% lower than the current RH%.

WHEN BUCKET FULL LAMP IS ON

The appliance will run continuously until the set RH% is reached or when the water bucket is full. When the water bucket is full, the Bucket Full indication lamp will light up and the dehumidifier will stop operating. Remove the water in the bucket with two hands, then place the water bucket back to it's proper position the machine will start operating again. This light will also illuminate when the bucket is removed or not properly inserted.

DEFROST

In the event frost builds up on the evaporator coils, the compressor will cycle off and the fan will continue to run until the frost is evaporated. This happens when the appliance is operating in low temperatures (less than 53°F or 12°C), which affects the efficiency of the dehumidifier. When this happens, the defrost lamp will turn on and the machine will go into periodic defrost mode automati- cally. Defrost time may vary. If the dehumidifier freezes up, turn the appliance off for few hours and then restart. The appliance will not operate satisfactorily if the room temperature is below 41°F

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model # RPD-702WP Disposal Information Table of Contents Safety Precautions Energy Saving Guide Technical Data ModelII. Introduction How it WorksIII. Parts and Controls Start Operation AIR Filters InstallationWhen Bucket Full Lamp is on IV. Operation InstructionsPositioning the Unit Gravity Method Installation of HoseContinuous Drainage Water Pump MethodEnd of Season Storage VI. MaintenanceCleaning the bucket Cleaning the air filterBasements VII. Tips on When to USE Your Portable DehumidifierRespiratory problems or allergies Excess moistureProblem Possible Causes Solutions VIII. TroubleshootingError Code Reason 30%RH VIII. Troubleshooting Error Codes90%RH ONE Year Limited Warranty

RPD-702WP specifications

The Whynter RPD-702WP is a versatile and efficient portable air conditioning unit that stands out for its innovative design, advanced technology, and user-friendly features. Ideal for residential spaces, office environments, or any setting where temperature control is a must, this portable air conditioner offers both cooling and dehumidifying benefits, making it a great choice for various climates and conditions.

One of the main features of the Whynter RPD-702WP is its dual functionality. It not only cools the air efficiently but also acts as a dehumidifier, removing excess moisture from the air to create a comfortable environment. This is particularly beneficial in humid regions where high moisture levels can make temperatures feel even warmer. With a dehumidifying capacity of up to 80 pints per day, it effectively helps maintain optimal humidity levels indoors.

The cooling capacity of the Whynter RPD-702WP is impressive, offering up to 7,000 BTUs. This makes it suitable for cooling areas up to approximately 300 square feet, providing relief during hot summer months. The unit operates quietly, ensuring that you can enjoy a comfortable atmosphere without the disruptive noise commonly associated with traditional air conditioning systems.

Another standout feature is the self-evaporative technology. This advanced system recycles and evaporates moisture collected during the cooling process, reducing the need for frequent emptying of the water tank. However, for added convenience, it still comes with a water tank that can be manually emptied if needed.

Mobility is a key characteristic of the Whynter RPD-702WP. The unit is equipped with four caster wheels, allowing it to be easily relocated from one room to another. The included exhaust hose is extendable, making it easy to set up in different spaces without hassle.

The user-friendly LED display and remote control make it easy to adjust settings from a distance. You can effortlessly switch between cooling modes, fan speeds, and set timers for operation. The programmable timer allows for cooling when you need it most, adding an element of flexibility to your comfort.

In addition to its performance features, the Whynter RPD-702WP includes an eco-friendly design. It uses R-410A refrigerant, which is less harmful to the environment compared to traditional refrigerants. This consideration for sustainability resonates with environmentally conscious consumers.

In summary, the Whynter RPD-702WP is a powerful and efficient portable air conditioning unit that combines cooling, dehumidifying, and eco-friendly technologies. Its mobility, user-friendly controls, and advanced features make it a prime choice for anyone looking to enhance their indoor climate during warmer months.
Top Page Image Contents