Whynter RPD-702WP Continuous Drainage, Water Pump Method, Installation of Hose, Gravity Method

Page 9

V. CONTINUOUS DRAINAGE

WATER PUMP METHOD

One of the key features of this unit is that it has a water pump that pushes water up or over a longer distance. Us- ing this feature will enable your unit to run maintenance free, and you will no longer have to empty a heavy reser- voir filled with water or worry about draining your unit using gravity.

INSTALLATION OF HOSE

This unit comes with a 16.5 ft. water pump hose. Once installed, the continuous drain outlet is bypassed and the water pump mo- tor is activated.

1.Firmly insert the water pump hose to the outlet.

2.A click sound will be heard to confirm that the hose is properly attached

3.Place the other end of the hose in a floor drain where water can be expelled.

NOTE: Water pump motor will not activate and work if water bucket is full. Make sure water bucket is empty or not full when using this drain method.

GRAVITY METHOD

This dehumidifier also comes standard with a 3 ft. drain hose. To use gravity to drain your portable dehumidifier, it must be installed on a level surface or at least 12 inches above the ground, on a sturdy table or shelf unit. When using the function of continuous drainage, the hose must be placed horizontally below the drainage hole. Avoid uneven ground and folding the hose.

1.You can use the supplied drain hose to connect to the continuous drainage connector.

2.Unscrew and remove the drain cover at the rear of the appliance.

3.Remove the soft rubber stopper. Put it into the water bucket for safe keeping.

4.Insert the drain hose through the hole of the drain cover.

5.Connect the drain hose to the drain port.

6.Tighten the drain cover in clockwise direction on to the rear of the appliance.

7.Place the bucket on its original location.

NOTE: When using continuous drainage setup, there may be some water collected in the water in the drain bucket

9

Image 9
Contents Model # RPD-702WP Disposal Information Table of Contents Safety Precautions II. Introduction Technical Data ModelHow it Works Energy Saving GuideIII. Parts and Controls When Bucket Full Lamp is on AIR Filters InstallationIV. Operation Instructions Start OperationPositioning the Unit Continuous Drainage Installation of HoseWater Pump Method Gravity MethodCleaning the bucket VI. MaintenanceCleaning the air filter End of Season StorageRespiratory problems or allergies VII. Tips on When to USE Your Portable DehumidifierExcess moisture BasementsProblem Possible Causes Solutions VIII. TroubleshootingVIII. Troubleshooting Error Codes Error Code Reason 30%RH90%RH ONE Year Limited Warranty

RPD-702WP specifications

The Whynter RPD-702WP is a versatile and efficient portable air conditioning unit that stands out for its innovative design, advanced technology, and user-friendly features. Ideal for residential spaces, office environments, or any setting where temperature control is a must, this portable air conditioner offers both cooling and dehumidifying benefits, making it a great choice for various climates and conditions.

One of the main features of the Whynter RPD-702WP is its dual functionality. It not only cools the air efficiently but also acts as a dehumidifier, removing excess moisture from the air to create a comfortable environment. This is particularly beneficial in humid regions where high moisture levels can make temperatures feel even warmer. With a dehumidifying capacity of up to 80 pints per day, it effectively helps maintain optimal humidity levels indoors.

The cooling capacity of the Whynter RPD-702WP is impressive, offering up to 7,000 BTUs. This makes it suitable for cooling areas up to approximately 300 square feet, providing relief during hot summer months. The unit operates quietly, ensuring that you can enjoy a comfortable atmosphere without the disruptive noise commonly associated with traditional air conditioning systems.

Another standout feature is the self-evaporative technology. This advanced system recycles and evaporates moisture collected during the cooling process, reducing the need for frequent emptying of the water tank. However, for added convenience, it still comes with a water tank that can be manually emptied if needed.

Mobility is a key characteristic of the Whynter RPD-702WP. The unit is equipped with four caster wheels, allowing it to be easily relocated from one room to another. The included exhaust hose is extendable, making it easy to set up in different spaces without hassle.

The user-friendly LED display and remote control make it easy to adjust settings from a distance. You can effortlessly switch between cooling modes, fan speeds, and set timers for operation. The programmable timer allows for cooling when you need it most, adding an element of flexibility to your comfort.

In addition to its performance features, the Whynter RPD-702WP includes an eco-friendly design. It uses R-410A refrigerant, which is less harmful to the environment compared to traditional refrigerants. This consideration for sustainability resonates with environmentally conscious consumers.

In summary, the Whynter RPD-702WP is a powerful and efficient portable air conditioning unit that combines cooling, dehumidifying, and eco-friendly technologies. Its mobility, user-friendly controls, and advanced features make it a prime choice for anyone looking to enhance their indoor climate during warmer months.