Wayne-Dalton 347610 Label Placement, Ceiling member, 16-18 x 1-1/4 Parallel to door

Page 16

 

Horizontal tracks

 

Vice clamp

Vice clamp

2nd Track roller

 

3/4” To 7/8”

3/4” To 7/8”

 

Door edges

 

Horizontal tracks

Rear center

Horizontal

back hang

Sound framing

members

track(1) 3/8” Truss head bolt (may not be supplied)

(1) 3/8” Nut

(may not be supplied)

Horizontal

track

Drill 3/8”

diameter hole

Center of the horizontal track

25

Label Placement

Tools: Step Ladder

IMPORTANT: Using the illustration, attach the appropriate labels to the ap- propriate location on the section, as shown.

Perforated angle bolted using (2) 5/16” x 1-5/8” hex head lag screws to ceiling member and parallel to door

NOTE: The Spring Warning tag(s) are factory attached (one per spring).

NOTE: Because of different configurations, some labels may require minor relocations.

Torsion spring tag(s) (one per spring)

Horizontal track

(3) 5/16” Bolts and nuts

Perforated angle

WARNING

Residential Dust label

(For California Residents Only)

HIGH SPRING TENSION CAN CAUSE SERIOUS INJURY OR DEATH.

DO NOT adjust, repair or remove springs or parts to which springs are connected, such as steel brackets, cables, wood blocks, fasteners or other parts of the counterbalance system.

Adjustments or repairs must ONLY be made by a trained door systems technician using proper tools and instructions.

DO NOT remove, cover or paint over this tag. Product user should inspect this tag periodically for legibility and should order a replacement tag from the door manufacturer, as needed.

5/16”-18 x 1-1/4” Hex bolts must extend into the track to serve as a roller stop

Residential

warning label

WARNING

WARNING

Sound framing members

(3) 5/16”

 

Bolts and nuts

 

Horizontal

Perforated angle bolted

track

using (2) 5/16” x 1-5/8”

 

hex head lag screws to

Perforated angle

ceiling member and

5/16”-18 x 1-1/4”

parallel to door

 

Hex bolts must extend into the

 

track to serve as a roller stop

 

Lift handles/gripping points are required

 

 

Lift handles/gripping points are required

on this door, located as spelled out in the

 

 

on this door, located as spelled out in the

installation instructions, even if the door

 

 

installation instructions, even if the door

is motor operated.

 

 

is motor operated.

Failure to install and use these lift handles/

 

 

Failure to install and use these lift handles/

gripping points on this door can result in

 

 

gripping points on this door can result in

serious injury to fingers and/or hands, if

 

 

serious injury to fingers and/or hands, if

placed in the opening between sections,

 

IMPORTANT

placed in the opening between sections,

when the door is operated manually.

 

when the door is operated manually.

WARNING

 

THIS WOOD PRODUCT REQUIRES PROPER

WARNING

 

ACC0RDANCE TO THE DIRECTIONS GIVEN IN THE

 

 

FINISHING PRIOR TO ANY DOOR HARDWARE BEING

 

 

 

APPLIED. BOTH INNER AND OUTER FACES OF THE

 

 

 

SECTION(S), AS WELL AS ALL EDGE SURFACES

 

 

important notice

MUST BE PREPARED AND FINISHED IN STRICT

 

The adjacent bottom corner bracket and

AND/OR DELAY IN FINISHING, THAT ALLOWS FOR

The adjacent bottom corner bracket and

Wood label

MANUAL UNDER “MAINTENANCE AND PAINTING

 

INSTALLATION INSTRUCTIONS AND OWNER’S

 

all cable retention features including

 

INSTRUCTIONS FOR ALL WOOD DOORS”.

all cable retention features including

milford pins, cotter pins, & clevis pins are

 

IMPROPER STORAGE, IMPROPER TRANSPORTATION

milford pins, cotter pins, & clevis pins are

under HIGH SPRING TENSION.

 

THE EXPOSURE OF THIS WOOD PRODUCT TO

under HIGH SPRING TENSION.

Adjustments and repairs must only be

 

THE LIMITED WARRANTY.

Adjustments and repairs must only be

 

 

MOISTURE AND/OR OTHER CONTAMINANTS, VOIDS

 

made by a trained door systems

 

 

made by a trained door systems

technician, using proper tools and

 

 

technician, using proper tools and

instructions.

 

 

instructions.

DO NOT REMOVE, COVER OR PAINT OVER

 

 

DO NOT REMOVE, COVER OR PAINT OVER

THIS LABEL. PRODUCT USER SHOULD

 

 

THIS LABEL. PRODUCT USER SHOULD

INSPECT THIS LABEL PERIODICALLY FOR

 

 

INSPECT THIS LABEL PERIODICALLY FOR

LEGIBILITY AND SHOULD ORDER A

 

 

LEGIBILITY AND SHOULD ORDER A

REPLACEMENT FROM THE DOOR

Bottom section warning labels

REPLACEMENT FROM THE DOOR

MANUFACTURER AS NEEDED.

MANUFACTURER AS NEEDED.

16

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer,

refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com

Image 16
Contents 7000/7400 Series B l e O f C o n t e n t sGraduated End Hinges Stacked Sections C1. Top SectionImportant Safety Instructions Tools Required Package ContentsDoor Section Identification Graduated End Hinge Strut IdentificationRemoving an Existing Door Preparing the OpeningRail of the bottom section Headroom RequirementsHeadroom Header board 2x Lumber preferred Min. sideRoom Clearance for Track isPage Track Roller Carriers StruttingRepeat the same process for the right hand side For 2 Long Strut ApplicationsHalf Center Hinges Top FixturesVertical Tracks Bottom SectionStacking Sections Adjusting Top Fixtures Horizontal TracksTop Section For Center Hinges and or half center hingesTorsion Spring Assembly Adjusted for each sideEnd Bearing Brackets Center BracketFor Doors with a Coupler Assembly Torsion Spring AttachmentTools Step Ladder, 1/2 Wrench If your door came with a Center Bracket BushingSet Collars Tools Vice ClampsWinding Springs Rear Back HangsSpring Set screws Approved Torsion shaft Winding coneCeiling member Label Placement16-18 x 1-1/4 Parallel to door Tools Power drill, 1/8 Drill bit, Tape measure Door Arm HookupLift Handles Pull Down RopeCleaning Your Garage Door Operation and MaintenancePainting Your Garage Door Clear Or Stained FinishesPage Warranty Limited warranty Model 7000 and 7400 Series

347610 specifications

Wayne-Dalton 347610 is a prominent overhead garage door model known for its blend of durability, functionality, and aesthetic appeal. Specifically designed to cater to residential needs, this garage door offers a reliable solution for homeowners seeking a balance of performance and style.

One of the main features of the Wayne-Dalton 347610 is its robust construction. The door is made from high-quality materials, which ensures longevity and resistance to wear and tear. Its design often incorporates reinforced insulation, which is not only energy-efficient but also aids in noise reduction. Homeowners appreciate this added quality, particularly in regions with extreme temperatures.

Another noteworthy characteristic of the Wayne-Dalton 347610 is its versatility in design options. The door comes in various colors, styles, and panel configurations, allowing homeowners to choose a look that complements their home’s architecture. This personalization enhances curb appeal while still offering the functionality expected from a modern garage door.

In terms of technology, this model features Wayne-Dalton’s innovative TorqueMaster Plus spring system. This patented technology increases safety and convenience by allowing for easy installation and maintenance. The system is designed to eliminate the need for exposed springs, reducing the risk of injury and providing a cleaner, more refined appearance.

The Wayne-Dalton 347610 is also equipped with advanced weather sealing, which ensures your garage remains protected from the elements. This feature is particularly beneficial in preventing water leaks, drafts, and pests from entering the garage, giving homeowners peace of mind.

Moreover, the door supports various operational mechanisms, including manual and electric options. Electric models are compatible with several types of garage door openers, ensuring smooth and reliable functionality. The integration of smart technology in some versions allows for remote access and monitoring via smartphones or smart home systems, enhancing convenience for tech-savvy homeowners.

Overall, the Wayne-Dalton 347610 is a well-rounded garage door solution. Its combination of quality construction, aesthetic versatility, innovative technology, and enhanced security features makes it an excellent choice for homeowners looking to invest in a reliable and stylish garage door. Whether for new builds or replacement projects, this model stands out as a top contender in the residential garage door market.