Wayne-Dalton GSM-12 Transfering Radio Remote Receiver Devices to Controller, Receiving

Page 11

Transfering Radio Remote

Receiver Devices to

Controller

1.Connect the Data Cable from the GSM-12 to the Remote Radio Receiver.

2.Press the MENU/NO button until the display indicates the Get From Receiver operation.

GET FRM RECEIVER

NO YES

3.Pressing the ON/YES button will display transfer operation activity.

RECEIVING......

a)When transfer operation is complete, the GSM-12 will display.

RECEIVING DONE

b)If the communication cable is not connected or the connection is not correct, the GSM-12 will display.

CHECKING COMM....

c)Then after two seconds the GSM-12 will display.

COMM ERROR

GET FRM RECEIVER

NOYES

RECEIVING......

RECEIVING DONE

CHECKING COMM....

COMM ERROR

	GSM-12
MENU/NO	ON/YES

Operation

You can reach us Toll Free 1-800-676-7734 for Consumer Assistance	11
or online at www.waynedalton.com

Image 11

Contents Gate System Master Controller Table of contents Deﬁnition of Symbol Battery Installation Accessing Battery CompartmentGenreal Information Protective Cover/Stand Data Cable ConnectionLearn DEVICE? No YES OperationActivating the GSM-12 GSM-12 Press MenuLearn TIME-OUT NEW Learn ID-XXXDuplicate ID-XXX ID-XXX Erased No UNDO? YES Erasing Individual Devices From The GSM-12Erase DEVICE? Noyes ID-XXX Yyyyyyy No ERASE? YESRetrieving Free Storage Space Erasing All Devices From GSM-12Sending Done Transfering Controller Devices to Radio Remote ReceiverSend to Receiver No YES SendingReceiving Done Transfering Radio Remote Receiver Devices to ControllerGET FRM Receiver No YES ReceivingTurn Unit OFF? Noyes Turning Off GSM-12Battery Replacement Service/Trouble ShootingMaintenance ServiceFCC and IC Statement FCC and IC StatementGSM-12 Limited Warranty