Wayne-Dalton GSM-12 operating instructions NEW Learn ID-XXX, Duplicate ID-XXX, Learn TIME-OUT

Page 7

Programing (Learning) Devices to the GSM-12 (Continued)

3.Press and hold the transmitter button you would like to program (learn) to the GSM-12.

4.Once the GSM-12 has received the transmission, two possible messages will be displayed.

a)Message 1 will be displayed if this is a new device.

NEW LEARN ID-XXX

b)Message 2 will be displayed if this device had been previously added.

DUPLICATE ID-XXX

5.If a transmission is not received within 30 seconds, the GSM-12 will display a time-out message.

LEARN TIME-OUT

6.To cancel the “Listen Mode” press MENU/ NO. The display will indicate this action.

LEARN CANCELLED

NEW LEARN ID-XXX

DUPLICATE ID-XXX

LEARN TIME-OUT

LEARN CANCELLED

	GSM-12
MENU/NO	ON/YES

Operation

You can reach us Toll Free 1-800-676-7734 for Consumer Assistance	7
or online at www.waynedalton.com

Image 7

Contents Gate System Master Controller Table of contents Deﬁnition of Symbol Battery Installation Accessing Battery CompartmentGenreal Information Protective Cover/Stand Data Cable ConnectionLearn DEVICE? No YES OperationActivating the GSM-12 GSM-12 Press MenuDuplicate ID-XXX NEW Learn ID-XXXLearn TIME-OUT ID-XXX Erased No UNDO? YES Erasing Individual Devices From The GSM-12Erase DEVICE? Noyes ID-XXX Yyyyyyy No ERASE? YESRetrieving Free Storage Space Erasing All Devices From GSM-12Sending Done Transfering Controller Devices to Radio Remote ReceiverSend to Receiver No YES SendingReceiving Done Transfering Radio Remote Receiver Devices to ControllerGET FRM Receiver No YES ReceivingTurn Unit OFF? Noyes Turning Off GSM-12Battery Replacement Service/Trouble ShootingMaintenance ServiceFCC and IC Statement FCC and IC StatementGSM-12 Limited Warranty