Wayne-Dalton GSM-12 Data Cable Connection, Genreal Information Protective Cover/Stand

Page 5

Data Cable Connection

Insert the Data Cable into the Communications Port on top of the GSM-12. Place the other end of the Data Cable in the Communications Port of the Wayne-Dalton remote radio receiver (sold separately).

Data Cable

Communication Port

MENU/NO

ON/YES

Genreal Information

Protective Cover/Stand

The protective cover of the GSM-12 has a built in Stand, which provides hands-free operation. To use the built-in stand, pull the Stand out from the rear of the GSM-12.

Stand

You can reach us Toll Free 1-800-676-7734 for Consumer Assistance

5

or online at www.waynedalton.com

 

Image 5
Contents Gate System Master Controller Table of contents Definition of Symbol Battery Installation Accessing Battery CompartmentGenreal Information Protective Cover/Stand Data Cable ConnectionActivating the GSM-12 OperationGSM-12 Press Menu Learn DEVICE? No YESLearn TIME-OUT NEW Learn ID-XXXDuplicate ID-XXX Erase DEVICE? Noyes Erasing Individual Devices From The GSM-12ID-XXX Yyyyyyy No ERASE? YES ID-XXX Erased No UNDO? YESRetrieving Free Storage Space Erasing All Devices From GSM-12Send to Receiver No YES Transfering Controller Devices to Radio Remote ReceiverSending Sending DoneGET FRM Receiver No YES Transfering Radio Remote Receiver Devices to ControllerReceiving Receiving DoneTurn Unit OFF? Noyes Turning Off GSM-12Maintenance Service/Trouble ShootingService Battery ReplacementFCC and IC Statement FCC and IC StatementGSM-12 Limited Warranty